A two-port silicon carbide single-clamped beam (cantilever) microelectromechanical system (MEMS) resonant device actuated piezoelectrically and sensed piezoelectrically has been designed, fabricated and tested. Lead zirconium titanate (PZT) has been used as active material to implement the piezoelectric actuator and sensor. Piezoelectric electrodes have been placed on the top of the single 3C-S...

Radiofrequency switches are critical components in wireless communication systems and consumer electronics. Emerging devices include switches based on microelectromechanical systems and phase-change materials. However, these devices suffer from disadvantages such as large physical dimensions and high actuation voltages. Here we propose and demonstrate a nanoscale radiofrequency switch based on ...

We present a microfabricated grating whose period can be tuned in analog fashion to within a fraction of a nanometer. The tunable angular range is more than 400 microrad in the first diffracted order. The design concept consists of a diffractive grating defined onto a 400-nm membrane, with the membrane subsequently strained in the direction perpendicular to the grating grooves by thin-film piez...

In the fields of MicroElectroMechanical Systems (MEMS) and Lab On a Chip (LOC), a device is often fabricated using diverse substrates which are processed separately and finally assembled together using a bonding process to yield the final device. Here we describe and demonstrate a novel straightforward, rapid and low-temperature bonding technique for the assembly of complete microfluidic device...

We have designed and fabricated a standardized specimen holder that allows the operation of a microelectromechanical system (MEMS) device inside a transmission electron microscope (TEM). The details of the design and fabrication processes of the holder are presented. The sample loading mechanism is simple and allows reliable electrical contact to eight signal lines on the device. Using a MEMS-b...

The reconstructed image of a moving sample always shows a distorted representation of reality. Therefore, one needs to calibrate, for example, out-of-plane nano-videos for quality control of nano-microelectromechanical systems (N-MEMS). Here we discuss how to calibrate and obtain confidence limits for stroboscopic scanning white light interferometry (SSWLI) data when there are differences in sp...

Two stacked integration methods have been developed to enable advanced microsystems of microelectromechanical systems (MEMS) on large scale integration (LSI). One is a wafer level transfer of MEMS fabricated on a carrier wafer to a LSI wafer. The other is the use of electrical interconnections using through-Si vias from the structure of a MEMS wafer on a LSI wafer. The wafer level transfer meth...

This paper deals with a relatively new area of radio-frequency (RF) technology based on microelectromechanical systems (MEMS). RF MEMS provides a class of new devices and components which display superior high-frequency performance relative to conventional (usually semiconductor) devices, and which enable new system capabilities. In addition, MEMS devices are designed and fabricated by techniqu...

Stiction failures in microelectromechanical systems (MEMS) occur when suspended elastic members are unexpectedly pinned to their substrates. This type of device failure develops both in fabrication and during device operation, being a dominant source of yield loss in MEMS. Stiction failures require first a collapse force that brings the elastic member contact with the substrate followed by an i...

A prototype portable device that allows for simultaneous hand and fingers motion precise force measurements has been. Wireless microelectromechanical systems based on inertial sensors are suitable tracking bodily measurements. In particular, they can be used interaction with computer applications. Our interest is to design a multimodal wireless grip measures evaluates this activity ludic or med...