This paper presents a low voltage wideband downconversion mixer using current-mode approach for multi-standard receivers. The proposed mixer uses a current mirror amplifier with an embedded passive switching core to achieve mixing function, which can combine the advantages of active and passive mixers simultaneously. The mixer is implemented using a 0.18μm CMOS technology and covers frequency b...

This paper presents the design methodologies and implementation of HEMT RF down conversion Mixer for 1.8 GHz to 5 GHz wireless and mobile applications.In many recent receiver designs, the front-end mixer determines the receiver's sensitivity and better isolation for the system. Single transistor mixer are developed for such an applications i.e. a Common source configuration, where the LO signal...

In this work we present a Schottky diode grid mixer suitable for mixing or detecting quasi-optical signals. The mixer is a planar bow-tie grid structure periodically loaded with diodes. A simple transmission line model is used to predict the reflection coefficient of the grid to a normally incident plane wave. The grid mixer power handling and dynamic range scales as the number of devices in th...

This paper describes a CMOS mixer core, operating at 1GHz, where the RF signal is input via the bulk. The advantages of a bulk driven mixer are low power supply voltages and low power consumption. Simulations have confirmed that a power supply as low as 1V can be used to power the mixer core, which drains approximately 1.6mA. Although the mixer core consumes very low power, it still provides re...

The original Mixer corpus was designed to satisfy developing commercial and forensic needs. The resulting Mixer corpora, Phases 1 through 5, have evolved to support and increasing variety of research tasks, including multilingual and cross-channel recognition. The Mixer Phases 4 and 5 corpora feature a wider variety of channels and greater variation in the situations under which the speech is r...

This mixer is based on a passive FET resistive frequency converter cell described by first described in the literature by Steven Maas [ ] and explored by Wes Hayward and others [ ]. One difficulty with a DFET passive mixer is obtaining negative gate bias. This has been achieved using gate conduction as in the TriQuint 5M31 [Campbell, Criss], a LO frequency driven negative voltage converter as i...

A new CMOS active mixer topology can operate at 1 V supply voltage by use of SCM (switched currentmirror). Such current-mode mixer requires less voltage headroom with good linearization. Mixing is achieved with four improved current mirrors, which are alternatively activated. For ideal switching, the operation is equivalent to a conventional active mixer. This paper analyzes the performance of ...

In this paper, low voltage high gain up-conversion mixer, designed in 90nm CMOS technology, is proposed to work in the frequency band of 2.4 GHz. Current bleeding technique and current mirror topology are used in the upconversion mixer. Conversion Of an input of 100 MHz Given as intermediate frequency signal to an output of 2.4 GHz radio frequency signal is done by the proposed mixer with a loc...

This paper presents the design and development of a ground-based microwave radiometer system (MWR) for the offshore oil platform. It will be used to provide long time series of geophysical parameters such as the sea-surface temperature, the near-surface wind speed and the sea ice type. The ground-based MWR is a five-frequency, dual-polarized microwave radiometer which is a total power type micr...