We determined the surface-enhanced Raman scattering of the plasmonic hybrid nanotubes of fullerene C60-polythiophene-Ag or Au nanoparticles (NPs) which were synthesized via the template-based electrocopolymerization of terthiophene-linked fullerene C60 and terthiophene-modified Ag NPs or Au NPs using a nanoporous alumina membrane as the template. The combination of plasmonic activity and chemic...

Porous alumina films had been fabricated by anodizing from aluminum films after an electropolishing procedure. Alumina stripes without pores can be distinguished on the surface of the porous alumina films. The width of the alumina stripes increases proportionally with the anodizing voltage. And the pores tend to be initiated close to the alumina stripes. These phenomena can be ascribed to the e...

A comparative analysis of the effectiveness deflocculating effect Russian and international polycarboxylate ethers additives on rheological properties high-alumina matrix suspensions is presented in this article. For production functional systems, submicron activated α-alumina modified high alumina cement are used ratio 80:20 90:10 wt. %, respec-tively. fluidity with a moisture content 20% carr...

Porous ceramic materials are of considerable interest for a variety of chemical and industrial applications in extremely harsh conditions, particularly at very high temperatures for long times. A modified gelcasting process employing agar as a natural gelling agent and polyethylene spheres as pore formers was exploited to produce porous ceramic bodies. Alumina and alumina-ZrO2 (AZ) powders were...

Asymmetric tubular alumina-supported poly(vinyl acetate) (PVAc) and poly(vinyl pyrrolidone) (PVP) membranes were created and characterized by pervaporation separation of binary mixtures of methanol and methyl tert-butyl ether (MTBE). The active separation layer was created by free-radical graft polymerization of PVAc and PVP onto a vinylsilane-modified alumina substrate with an average native p...

Microwave sintering (MW) allows fast heating (?30 min) and densification of ceramic materials, like alumina Al2O3. In order to predict the final material properties (density, size grain size) mechanical SOVS (Skorohold Olevsky Viscous Sintering) model is adapted validated for conventional alumina. The implemented on ABAQUS with UMAT subroutine. Secondly, modified microwave by adapting shear vis...

Bi-continuous alumina/aluminium composites were made by infiltrating an alumina preform which had the structure of a reticulated ceramic foam. The low density preforms were prepared from a polyurethane suspension of alumina powder which was pyrolysed and sintered after foaming. Higher density preforms consisted of ceramic foams with open cells. All these preforms were infiltrated with 6061 alum...

Alumina is one of the most widely used adsorbent for removal of dissolved pollutants from waste water. Various chemical species, especially ions, are known to be adsorbed onto alumina. On the other hand, alumina is a typical support for catalysts. Many kinds of metal supported catalysts are prepared using alumina as their support. These two roles of alumina, i.e., as adsorbent and support, are ...

Alumina nanofibers were prepared by a technique that combined the sol-gel and electrospinning methods. The solution to be electrospun was prepared by mixing aluminum isopropoxide (AIP) in ethanol, which was then refluxed in the presence of an acid catalyst and polyvinylpyrolidone (PVP) in ethanol. The characterization results showed that alumina nanofibers with diameters in the range of 102 to ...

The control of particle size distribution of fabricated alumina nanoparticles from general alumina that has a large geometric standard deviation (GSD) is studied. A thermophoretic separator was used to control the GSD of the fabricated alumina nanoparticles. Unevaporated particles and primary particles were separated to yield a small GSD for fabricated alumina nanoparticles. The fabricated alum...