For the first time this study reported the success of using nanocrystalline hexagonal close-packed (hcp) nickel (Ni) modified composite graphite (CG) electrode (hcp-nano Ni/CG) for the electrocatalytic oxidation of glycerol in alkaline medium (0.1 M KOH). The hcp-nano Ni/CG electrode had an improve response and specificity on the electrocatalytic oxidation of glycerol over the bare CG. The elec...

Ni-Fe/Si3N4 nanocomposite coatings with various ratio of Si3N4 to Na-saccharine were prepared by electrodeposition technique. The effect of Si3N4 nanoparticulates in the Ni-Fe nanocomposite coatings was investigated in relation to the ratio of Si3N4 to Na-saccharine in the plating bath. X-ray diffraction analysis showed that the Ni-Fe nanocomposite coating has face center cubic structure (FCC)....

Metallic composite coatings with ceramic particles can be used to improve the mechanical and corrosion properties of steel. In the present research, Ni-ZrO2-TiO2 composite coating was fabricated on AISI 430 stainless steel through the electrodeposition method. The effect of the current density of electroplating (15, 17, 20, and 23 mA.cm-2)was investigated on the...

bioleaching of spent refinery processing catalysts using adapted indigenous strains ofacidithiobacillus ferrooxidans to recover ni and mo, and the separation of ni from bioleaching liquor usingiron magnetic nanoparticles were optimized in this study. bioleaching optimization was performed usingcentral composite design (ccd) method to optimize temperature (32 to 38oc), initial ph (1.5 to 2), par...

Electrochemical coating processes are significantly affected by applied magnetic fields due to the generation of electromagnetic forces. The present research work has been undertaken to study the effect of coating parameters such as current density and alumina concentration on the characteristics of Ni-Al2O3 composite coating under static magnetic field. Ni-Al2O3 composite coating was applied o...

Plastic deformation behavior of Cu/Ni/W metallic multilayers with individual layer thickness ranging from 5 nm to 300 nm is investigated by nanoindentation testing. The experimental results reveal that the composite still exhibits indentation-induced plastic deformation instability and the loss of strain hardening ability at the nanometer scale even if the composite contains two kinds of layer ...

PURPOSE The aim of the present study was to evaluate the fracture resistances of zirconia, cast nickel-chromium alloy (Ni-Cr), and fiber-composite post systems under all-ceramic crowns in endodontically treated mandibular first premolars. MATERIALS AND METHODS A total of 36 extracted human mandibular premolars were selected, subjected to standard endodontic treatment, and divided into three g...

in this research, al-ni particle composite strips are formed by accumulative roll bonding (arb) process using al strips and ni powder. the rule of arb cycles and volume percentage (vol%) of ni powder on the microstructure, wear resistance and mechanical properties of the formed composites are investigated. according to the tensile test results, the yield stress and tensile strengths of the al -...