The adsorption of silica nanoparticles onto representative mineral surfaces and at the decane/water interface was studied. The effects of particle size (the mean diameters from 5 to 75 nm), concentration and surface type on the adsorption were studied in detail. Silica nanoparticles with four different surfaces [unmodified, surface modified with anionic (sulfonate), cationic (quaternary ammoniu...

In this research the effects of adding silica and alumina nanoparticles on flow ability and compressive strength of cementitious composites based on Portland cement were investigated. In the first stage, the rheological behavior of different samples containing nanosilica, nanoalumina and polypropylene, polyvinyl alcohol and polyethylene fibers were evaluated. With increasing of nanoparticles in...

Copper oxide nanoparticles within hollow mesoporous silica spheres were prepared by binding/adsorbing Cu2+ or [Cu(NH3)4(H2O)2]2+ ions on the surface of carbon spheres, followed by formation of a mesoporous silica shell by sol-gel processing and calcination in air. The CuO nanoparticles can subsequently be converted into Cu3N nanoparticles by nitridation with ammonia. The effect of the different...

Multifunctional coatings offer many advantages towards protecting various surfaces. Here we apply aggregation induced segregation of perylene diimide (PDI) to control the surface morphology and properties of silica nanoparticles. Differentially functionalized PDI was incorporated on the surface of silica nanoparticles through Si-O-Si bonds. The absorption and emission spectra of the resultant f...

Iron oxide nanoparticles were synthesized and coated with silica by conventional coprecipitation method. Silica coated iron oxide nanoparticles were surface functionalized with chitosan. Silica coating and chitosan functionalization were confirmed by FTIR and TG-DTA analysis. XRD pattern revealed that the pure phase of Fe3O4 was retained even after coating. Particles of average size 12 nm were ...

Optical activity of hierarchical supramolecular assemblies based on organic dyes would create multiple functional architectures. In this work, three kinds of silica nanoparticles with or without functional groups were synthesized. For the first time, silica nanoparticles can induce positively charged squaraine (SQ) to aggregate to form supramolecular assemblies. Adenosine-5'-triphosphate (ATP) ...

Gadolinium oxide (Gd2O3) nanoparticles with very small size and narrow size distribution were synthesized by infiltration of Gd(NO3)3·6H2O as an oxide precursor into the pores of SBA-15 mesoporous silica using a wet-impregnation technique. High resolution transmission electron microscopy and X-ray diffraction show that during the hydrothermal treatment of the precursor at 550 °C, gadolinium oxi...

Thiol-modified poly(ethylene glycol) (mPEG-SH) has been used to replace standard capping agents from the surfaces of gold nanoparticles with different sizes and shapes. Upon PEG stabilization, the nanoparticles can be transferred into ethanol, where silica can be directly grown on the particle surfaces through the standard Stober process. The obtained silica shells are uniform and homogeneous, ...

In this study different nanofluids with phase change behavior were developed by mixing a molten salt base fluid (KNO3 selected as phase change material) with nanoparticles using the direct synthesis method. The thermal properties of the nanofluids obtained were investigated. Following the improvement in the specific heat achieved, these nanofluids can be used in concentrating solar plants with ...

For controlled release and targeted delivery of curcumin in an aqueous medium a method of encapsulating curcumin and magnetic nanoparticles inside porous silica matrix has been developed. Curcumin and superparamagnetic nanoparticles are loaded inside porous silica in a single process. The graphic shows the TEM image of microtomed sample of Fe(3)O(4) particles surrounded by a silica matrix.