In this paper, we propose an optical millimetre wave radio-over-fibre (mm-wave RoF) system that uses a dual drive Mach Zehnder modulator (DD-MZM), which is biased at the maximum transmission biasing point, to generate an optical double sideband-suppressed carrier. The input to the DD-MZM are binary phase shift keying (BPSK), quadrature phase shift keying (QPSK), 8-phase shift keying (8-PSK) and...

Greater than 12 W of average output power has been generated from a diode-pumped Yb:YAG cladding-pumped planar waveguide laser. The laser radiation developed is linearly polarized and diffraction limited in the guiding dimension. A slope efficiency of 0.5 W/W with a peak optical-optical conversion efficiency of 0.31 W/W is achieved. In a related structure, greater than 8 W of Q -switched averag...

Ring-structured Bragg fibres that support a single TE-polarisation mode are investigated. The fibre designs consist of a hollow core and rings of holes concentric with the core, which form the low-index layers of the Bragg reflector in the cladding. The effects of varying the air fraction in each ring of holes on the transmission properties of the fibres are analysed and an approximate model ba...

In this work, a high power Ytterbium pump laser was used in a quasicontinuous wave (CW) pump scheme to generate supercontinua in two different optical fibres, a depressed cladding, graded index highly nonlinear fibre (HNLF), and a solid core photonic crystal fibre (PCF). Pumping a 300 m length of the HNLF with a peak pump power of 140 W, a continuum with a spectral flatness of 5 dB over 1000 nm...

In Malaysia, fiber cable is commonly installed underground or overhead. Once optical fibre cable is installed either underground or over-head, there is no physical maintenance implemented. The only maintenance on fibre cable is the monitoring of optical fibre attenuation. Bend loss affects the attenuation and any bending cable that contributes to the bend loss remains unmaintained since there i...

We explore the duality between metric and material properties in the Maxwell’s equations to design metamaterial blueprints for cladding control of waveguide modes. We illustrate designs for circular and rectangular waveguides. In contrast to standard material loading of waveguides, the proposed cladding does not produce hybrid modes. The cutoff frequencies of the propagating modes can be contro...

We investigate the performance of a simple corrugated aperture scanning near-field optical microscope (SNOM) probe with various cladding metals. The probes have only one corrugation, however, they offer increased transmission over both uncorrugated probes and those with many grooves. Enhancement of light throughput results from excitation of surface plasmons at the corrugation at the core-cladd...

Thin glass fibers imbedded into a glass cladding of slightly lower refractive index represent a promising medium for optical communication. This article presents simple formulas and functions for the fiber parameters as a help for practical design work. It considers the propagation constant, mode delay, the cladding field depth, and the power distribution in the fiber cross section. Plots vs fr...

In this paper we demonstrate a simple temperature and strain discriminating sensor based on a single fibre Bragg grating inscribed by a femtosecond laser via the point-by-point technique. These gratings exhibit strong and extensive cladding mode structures and by simultaneously monitoring both the Bragg wavelength and a cladding mode spaced by ~ 40 nm from the Bragg peak, as a function of both ...