Sintering is a method that makes powdered materials (such as fine ore or preparation concentrate) into block mass under conditions involving incomplete fusion by heating to high temperature. Its production is sinter which is irregular and porous (FU et al., 1996). The following parts are usually included in sintering process: acceptance and storage of iron-containing raw materials, fuel and flu...

The lead–zinc ore is a typical low-grade complex polymetallic sulphide ore. Its mineralogy characterized by high content of cryptocrystalline graphite, low lead, zinc, and copper, fine grain size. However, the aggregation size sulfide mineral aggregations coarse, symbiotic relationship relatively simple. Conventional process treatment requires grinding into monomer dissociations followed prefer...

To achieve the utilization of fine ilmenite (especially ?0.075 mm) produced in titanium-magnetite processing plant Panzhihua, a radial turbulent outer-cylinder magnetic separator (RTOCMS), was developed this study. After optimizing conditions rotation speed and water flow, an RTOCMS concentrate with TiO2 grade 22.84% recovery 66.93% obtained through one-stage roughing pre-concentration flowshee...

This paper presents the influences on the entrainment of serpentines by grinding and reagents during copper–nickel sulfide flotation. The previous bench flotation tests were performed to extract the metallic values from the ore in Yunnan Mine, China and the relatively satisfied results with recoveries of 86.92% Cu, 54.92% Ni, and 74.73% Pt+Pd in the concentrate were harvested at their grades of...

The formation of soluble species from a bornite flotation concentrate pre-treated with hydrochloric acid was studied. Copper recovery after leaching in H2SO4-NaCl solution determined. influence concentration and ore particle size were evaluated. Chemical morphological characterization the samples before carried out by XRD SEM to evaluate changes bornite. It revealed that increasing during pre-t...

A dynamic simulation algorithm based on 1-D transient convection/diffusion transport per particle size class is proposed to simulate a hydraulic classifier operated selectively remove quartz from an iron oxide concentrate produced by processing the ore mine in northeastern Canada. The calibrated model used operation of dense bed classifiers different sizes and/or under operating conditions. sim...

Increasing the efficiency of crushing circuits is associated with a decrease in particle size finely crushed ore and use dry magnetic separation ore. Reducing grinding costs achieved by using drum mills jointly other designs. The automation systems, slurry demagnetization, technologies staged concentrate separation, beneficiation fine screening closed cycle lead to reduction costs. main industr...