The purpose of the study is to investigate average and local surface heat transfer coefficients in a cylinder packed with spheres. Here the term «local» applies to a single sphere within the bed. Averages are derived from the sixteen different spheres that were instrumented and distributed throughout the bed. The experimental technique consisted of introducing a step - wise change in the temper...

Effect of configuration (structure of electrode, interelectrode gap, positions of inlet and outlet, volume of the cell and additional nets) on mass transfer characteristic of a filter-press type electrochemical cell has been studied. The mass transfer coefficients on the electrodes were obtained by using the well-known technique based on the determination of limiting diffusion current. It is fo...

An integrated process coupling solid-liquid extraction and liquid-membrane preconcentration of vincamine was studied. The effect of the ratios solid phase/extractant volume and extractant volume/liquid membrane volume on the mass transfer rate and efficiency of vincamine removal were estimated. It was found that the transfer rate and removal efficiency of the alkaloid were higher with smaller q...

Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...

Pulsating heat pipe is an efficient heat exchange device which is being used for cooling and heating recovery. In the present work, we made a closed-loop pulsating heat pipe with six U-turns and we used water in our system. Moreover the use of water-Fe3O4 nanofluid was studied with two different filling ratios 40% and 50% and 1% mass concentration. At the end we calculated heat resistance and h...

The process of column Crystallization at total reflux and steady state was analyzed mathematically and experimentally in order to determine the mechanisms by which separations are achieved and limited. The results of the study indicate that separation is produced by the formation of crystals in the freezing section and by interphase mass-transfer in the adjacent purification section. The separa...

The kinetics of supercritical fluid extraction (SFE) of clove and vetiver oils using carbon dioxide as solvent was studied, in order to establish an efficient method to predict extraction curves on large scale. The mass transfer model of Sovová was used to adjust the experimental SFE data, which were obtained at 100 bar and 35 °C for clove and 200 bar and 40 °C for vetiver, using extraction col...

Heat transfer with liquid–vapor phase change in microchannels can support very high heat fluxes for use in applications such as the thermal management of high-performance electronics. However, the effects of channel cross-sectional dimensions on the two-phase heat transfer coefficient and pressure drop have not been investigated extensively. In the present work, experiments are conducted to inv...