Portable chainsaws are associated with substantial risk and can cause serious injury to operators, especially during kickback. This paper presents new results from research and analyses conducted regarding the impact between the different properties of wood on this occurrence. In an open area, such differences may include: wood species, humidity, temperature and the facing angle of the wood fib...

The management of discarded treated wood products upon disposal is one of the many factors that should be considered when evaluating a new wood preservative or when comparing wood preservatives as part of a life cycle assessment. Future environmental ramifications of disposal, as well as regulatory requirements and costs, must be assessed and weighed. This paper presents an overview of the fact...

Kraft pulp produced from juvenile and mature wood from thirty-two-yearold Corymbia citriodora trees was evaluated. The stem was subdivided into regions of juvenile and mature wood, and then it was transformed into chips. These materials were then cooked in the Laboratory of Pulp and Paper at São Paulo State University (UNESP, Botucatu, SP, Brazil) and the physico-mechanical properties of the pu...

The purpose of the present study was to determine whether simple additions to the home cages of rats made those cages preferable to standard housing arrangements. Results indicated that most rats preferred cages with wood platforms, wood chips, and paper towels to otherwise identical cages without these items. Wood chips were not, however, practical with the cages used in the present study. Pla...

Coating performance is greatly influenced by the properties of the wood substrate. This study was focused on evaluating the performance of coatings on both preservative- and thermally-treated wood. A number of commercially formulated semi-transparent stains Alkyd, Alkyd-Acrylic and PU were applied on four different types of preservative treated and heat-treated wood and their performances were ...

Wood extractives cause pitch problems in pulp and paper manufacture. Extractives are low-molecular weight lipophilic components in wood consisting mainly of triglycerides, waxes, steryl esters, sterols, free long chain fatty acids and resin acids (Fengel and Wegener 1989a). The deposits of wood extractives associated with fibers, inorganic salts and additives, technically referred to as pitch, ...

From time to time, wood plays an important role in solving criminal cases. Wood samples vary in size and can range from trees and logs to pieces as small as individual wood fibers. Botanists can easily identify trees. especially when the leaves, flowers. or fruits are present. Using standard techniques. wood technologists. foresters, and wood anatomists can generally identify logs, lumber, wood...

The mechanical properties of wood-based composites are dependent upon the properties of the wood components (e.g. wood fibers, wood strands) and the manner in which they are combined. The relationship between fiber mechanical properties and fiber-based composites has been discussed in several publications, but is best described in Page et al. (1977). This paper will focus primarily on the influ...

in this research, the effect of tension wood formation in populus nigra on its anatomical characteristics was studied. vessel element and ray frequency (n/mm²), vessel diameter and ray dimensions were measured in both normal and tension wood. furthermore, the formation of gelatinous layer (g-layer) in the fibers of tension wood was studied. the results showed that the vessel proportion and diam...

The objective of this paper is to present a method for the design of solid wood panels with cross layers. The stress distribution in and the deformation behaviour of solid wood panels were analysed using the composite theory. The shear influence in solid wood panels was determined using the shear analogy method. A strength class system is proposed for the design of solid wood panels with cross ...