PURPOSE The aim of this study was to evaluate the interface accuracy of computer-assisted designed and manufactured (CAD/CAM) titanium abutments and implant fixture compared to gold-cast UCLA abutments. MATERIALS AND METHODS An external connection implant system (Mark III, n=10) and an internal connection implant system (Replace Select, n=10) were used, 5 of each group were connected to mille...

Bone remodeling and, consequently, soft tissue levels around osseointegrated implants may be influenced by many variables that are considered of prosthetic or biomechanical nature: implant-abutment connection type and geometry (external vs internal), timing of abutment connection (at uncovering vs delayed), abutment material (titanium vs gold vs ceramic), abutment shape and dimensions (convex v...

PURPOSE The purpose of this study is to evaluate the stability of interface between Co-Cr-Mo (CCM) UCLA abutment and external hex implant. MATERIALS AND METHODS Sixteen external hex implant fixtures were assigned to two groups (CCM and Gold group) and were embedded in molds using clear acrylic resin. Screw-retained prostheses were constructed using CCM UCLA abutment and Gold UCLA abutment. Th...

PURPOSE Three-dimensional finite element analysis was conducted to evaluate and compare the stress distribution in the abutment and retention screw of implant-supported single crowns with platform switching and with a conventional platform under vertical and oblique loading. MATERIALS AND METHODS Two finite element models were created simulating an osseointegrated implant (4 × 10 mm, platform...

OBJECTIVE Provisional cements are commonly used to facilitate retrievability of cement-retained fixed implant restorations; but compromised abutment preparation may affect the retention of implant-retained crowns.The purpose of this study was to investigate the effect of abutment design and type of luting agent on the retentive strength of cement-retained implant restorations. MATERIALS AND M...

Abstract This clinical report presents a case of abutment fracture, due to occlusal overload, occurred with an implant-supported restoration on right mandibular first molar of a female patient. After 6 months of prosthetic reconstruction implants, the patient returned to the clinic due to the loss of implant crown. The fractured fragment of the abutment with the screw protec...

A coded implant healing abutment makes an impression at the implant level no longer necessary. An impression is made of the healing abutment, which is placed onto the implant directly after implant placement. The codes embedded in the occlusal surface of the healing abutment provide essential information for the computer software to place the implant analog in the definitive cast and to design ...

A five unit fixed dental prosthesis with a pier abutment poses a unique challenge of a fulcrum and torquing forces at the intermediate abutment. The use of a rigid connector can lead to localization of forces on the pier abutment. Therefore, the use of a non-rigid connector as a stress breaker has been advocated to alleviate the situation. The following case report describes the factors associa...

scour around bridge piers is one of the most important fields of hydraulic research. local scour around bridge piers and abutment is one of the main reasons of bridge failures. in the field of scour at the bridges, researches are more focus on scour of piers in compare with abutment. while the available information on the bridge failures required cost, the major problems are related to abutment...