This paper deals with the vibration analysis of an asymmetric composite beam composed of glass a piezoelectric material. The Bernoulli’s beam theory is adopted for mechanical deformations, and the electric potential field of the piezoelectric material is assumed such that the divergence-free requirement of the electrical displacements is satisfied. The accuracy of the analytic model is assessed...

High-quality single crystalline zinc oxide nanowires were grown on silver and gold coated plastic substrates for the fabrication of a sandwich-like nanogenerator using the aqueous chemical growth method. The applicability of this configuration as a nanogenerator is demonstrated by studying the harvested electrical output under mechanical deformation. Three different configurations were fabricat...

using piezoelectric patches the stress concentration around a hole on a plate under tension is reduced and controlled. to attain the reduction in stress two placements for piezoelectric patches is investigated. the first location is top/bottom of the hole with compression induced strain and the second is left/right of the hole with tension induced strains to control the stress flow. the result ...

The proportional and derivative nonlinear potential feedback controls via piezoelectric sensor and actuator layers are used. A simple and consistent model combining the geometrical nonlinear affects and the feedback control of a piezoelectric/elastic/piezoelectric sandwich beams is derived. A mathematical methodology based on the multiple scales method for nonlinear vibration control of seconda...

Current controlled piezoelectric beams have been very popular recently due to the substantial reduction of hysteresis between the input and output. Even though there are many different PDE models for the voltage and charge controlled piezoelectric beams, there is no thoroughly derived PDE model in the literature for current controlled piezoelectric beams. A variational approach is utilized to d...

The vibration characteristics of piezoelectric hollow-disc transducers were investigated in this paper. It was assumed that the vibration modes were coupled in the axial and radial directions. Theoretically the differential equations of piezoelectric motions were derived in terms of the axial and radial displacements and the electric potential. Solutions of the boundary value problem yielded th...

KEYWORDS piezoelectricity, two-dimensional (2D) material, monochalcogenide, density functional theory (DFT) calculation ABSTRACT It is found that several layer-phase group-III monochalcogenides, including GaS, GaSe, and InSe, are piezoelectric in their monolayer form. First-principles calculations reveal that the piezoelectric coefficients of monolayer GaS, GaSe, and InSe (2.06, 2.30, and 1.46 ...

A novel approach for nanoscale imaging and characterization of the orientation dependence of electromechanical properties-vector piezoresponse force microscopy (Vector PFM)-is described. The relationship between local electromechanical response, polarization, piezoelectric constants, and crystallographic orientation is analyzed in detail. The image formation mechanism in vector PFM is discussed...

We demonstrate a mechanical-electrical trigger using a ZnO piezoelectric fine-wire (PFW) (microwire, nanowire). Once subjected to mechanical impact, a bent PFW creates a voltage drop across its width, with the tensile and compressive surfaces showing positive and negative voltages, respectively. The voltage and current created by the piezoelectric effect could trigger an external electronic sys...

Themanipulation of charge-carrier conduction characteristics is a critical attribute governing the operation and efficiency of photovoltaic, catalytic, and other energy-converting systems that are based on electrochemical principles. This manipulation is often accomplished through the application of electrical-potential gradients by an external power supply and/or the creation of electronic-sta...