Laboratory measurements were undertaken to investigate wave and current velocities in the vicinity of a wind turbine monopile foundation, in order to inform environmental impact assessments and to quantify flow variability in the region of the power take off cable. Flow measurements were made up to 15.5 pile diameters (D) downstream of the pile. Measurements were also taken around the perimeter...

Several authors have written papers dealing with a class of combinatorial games consisting of one-pile and two-pile counter pickup games for which the maximum number of counters that can be removed on each move changes during the play of the game. See Holshouser [8],[7], and Flanigan [4]. The maximum number of counters that can be removed can depend upon a number of factors including the number...

Batter piles are most commonly used to resist large lateral loads caused by winds, tidal waves and soil pressure as experienced offshore structures, bridges, towers in general. The details literature on the dynamic behaviour of these batter based in-situ tests limited. present study focused single pile groups subjected machine induced vibrations using 3D finite element (FE) analysis. coupled so...

The settlement of a group pile foundation is the result elastic-plastic and rheological soil. Unfortunately, most research only considers elasto-plasticity piles or soils. Classical theories like Poynting-Thompson model provide some prediction for behavior groups, which cannot satisfactorily reflect total characteristics foundation. In current paper, we presented method to study behaviors in li...

The integrity of cast-in-place foundation piles is a major concern in geotechnical engineering. In this study, distributed fibre optic sensing (DFOS) cables, embedded in a pile during concreting, are used to measure the changes in concrete curing temperature profile to infer concrete cover thickness through modelling of heat transfer processes within the concrete and adjacent ground. A field tr...

At present, reducing subgrade settlement of soft soil foundation is a key problem in high-speed railway construction. Pile-slab structure is a widely-utilized form of foundation structure to reduce the subgrade settlement in China. In order to save the engineering cost for high-speed railway construction in developing countries, the author developed a pile-slab structure and named it as the new...

stable pile depth in the Snowy River study (SKM 2005) is outlined. The inputs used in the run of the LLP99 model were: • single soil layer, • very high flexural stiffness of pile (1,000,000 kN/m). • pile width = 0.3 m (i.e. wooden pile), • shear strength in the absence of lateral stress (for unconsolidated sand 150 kN/m was used), • effective unit weight of soil (15 kN/m), • active lateral effe...

The present study compared the performance of soldier pile and concrete bearing pad anchored wall facings. Using Abaqus finite element software, two case studies have been precisely represented for the facing designs and effects of the parameters of soil type, spacing of anchors and facings, surcharge and facing sizes were investigated. The analysis results indicate that the soldier pile method...

this paper develops an analytical method to calculate seismic bearing capacity of a strip footing, which is located on a slope reinforced with rows of pile. the resistance of passive pile is determined based on normal and shear stress of the soil around the pile, which is then compared to other analytical methods. this comparison indicates an acceptable agreement. the variants of the study incl...

in this paper, pile behavior embedded in layered soil deposits subjected to seismic loadings is analyzed using a nonlinear fiber element for simulation of soil – pile interactions. in the created model, both pile and surrounding soil are modeled using fiber elements in a practical beam on nonlinear winkler foundation (bnwf) concept. herein, the features of drain–3dx finite element software are ...