The use of Cs0.5H0.5PW12O40 insoluble salt as a superacid promoter in the catalyst layer of a polymer electrolyte membrane fuel cell (PEMFC) has been investigated. An increase of performance has been recorded at intermediate temperatures (110–130 °C) and under low relative humidity (R.H.). The promoter appears to mitigate the ionomer dry-out effects in the catalytic layer and produces an increa...

A poly(vinyl chloride) membrane based on a new a-dioxime derivative as membrane carrier was prepared andinvestigated as a Cr(III) selective electrode. The electrode exhibits a good potentiometric response for Cr(III)over a wide concentration range 1.0 x 10-6 to 1.0 x 10-1 M with a slope 19.5+0.5 mV/decade and low detectionlimit of 8.9 x 10-7 M. It has a fast response time < 15 s. The best perfo...

This review first describes the invention of functional interfaces to promote biochemical redox reactions between substrates in dipolar aprotic solvents and enzymes or related compounds immobilized at the interface. The interfaces contain hydrophilic polymer membranes, a gold nanoparticle self-assembled electrode constructed by using rigid rod dithiols, and binary self-assembled monolayers comp...

We here report on the first example of an aptamer-based potentiometric sandwich assay of proteins. The measurements are based on CdS quantum dot labels of the secondary aptamer, which were determined with a novel solid-contact Cd2+-selective polymer membrane electrode after dissolution with hydrogen peroxide. The electrode exhibited cadmium ion detection limits of 100 pM in 100 mL samples and o...

sol-gel and polymeric membrane electrodes, based on thiacalix[4]arene as a neutral carrier, weresuccessfully developed for the detection of vo2+ in aqueous solutions. the sol-gel and pvcmembrane electrodes exhibited linear response with nernstian slopes of 29.3 and 28.4 mv perdecade, respectively, within the vanadyl ion concentration ranges from 1.0 × 10-6 to 1.0 × 10-1mol dm-3 and from 1.0 × 1...

fe2+ ion-selective membrane sensor has been fabricated from polyvinyl chloride (pvc) matrixmembrane containing neutral carrier tetra phenyl porphyrin (tpp) ionophore. the addition ofsodium tetraphenylborate (natpb) and the plasticizer dbp has been found to substantiallyimprove the performance of the sensor. the best performance was obtained with the sensor havinga membrane of composition of tpp...

A PVC membrane Ni(II) ion selective electrode has been constructed using (1E,2E)-bis(2-aminophenyl)N'1,N'2-dihydroxyethanebis as membrane carrier. The electrode exhibited a goodpotentiometric response for Ni(II) over a wide concentration range 1.0×10-4 to 1.0×10-1M with aslope of 29.4±0.5 mV/decade a and a working pH range of 6.5-9.0. It had a fast response time of≤20s. The best performance was...

Water management is one issue that must be surpassed to ensure high membrane proton conductivity and adequate reactant transport in the membrane-electrode assembly (MEA) simultaneously. A well-designed water system based on a comprehensive understanding of inner part polymer electrolyte (PEM) fuel cell. In this work, phenomena MEA PEM cell are analyzed by using mathematical model. The diluted s...

We are proposing a conceptual membrane electrode assembly (MEA) of proton exchange water electrolyzer that includes layer graphene oxide (GO) at the cathode side. This GO primarily reinforces MEA to allow operation higher pressure difference between and anode Additional benefits would be perfect prevent both hydrogen crossover thus for pure, dry escaping directly from without losses due crossov...

Trilayer polypyrrole microactuators that can operate in air have previously been developed. They consist of two outer layers of the electroactive polymer polypyrrole (PPy) and one inner layer of a porous poly(vinylidene flouride) (PVDF) membrane containing a liquid electrolyte. The two outer layers of PPy are each connected with gold electrodes and separated by the porous PVDF membrane. This mi...