We demonstrate improved performance in interfacing standard fibers with nanophotonic waveguides through a mechanically compliant polymer interface. We show -1.4dB peak transmission with 0.8dB penalty over the ~100nm bandwidth measured and all polarizations. OCIS codes: (130.3120) Integrated optics devices; (250.5300) Photonic integrated circuits Challenges in cost and scalability of photonic pa...

High Coupling Efficiency of Microcavity Organic Light-Emitting Diode with Optical Fiber for as Light Source for Optical Interconnects Takeshi Fukuda∗, BinWei, Masakazu Ohashi, Musubu Ichikawa and YoshioTaniguchi Applied Electronics Technology Department, Optics and Electronics Laboratory, Fujikura Ltd., 1440, Mutsuzaki, Sakura, Chiba, 285-8550, Japan Department of Functional Polymer Science, Fa...

The study reported here deals with the exploitation of perfluorinated graded index polymer optical fiber bandwidth to add further services in a home/office network. The fiber properties are exhibited in order to check if perfluorinated graded index plastic optical fiber (PFGI-POF) is suitable to support a multiplexing transmission. According to the high bandwidth length of plastic fibers, both ...

We describe graded-index polymer optical fibers with high bandwidth (5.12 GHz for 100-m transmission) and low loss in the near-infrared region (56 and 115 dB/km at wavelengths of 688 and 773 nm, respectively) that we successfully obtained with a new interfacial-gel polymerization technique using an all-deuterated methyl methacrylate monomer and a partially fluorinated acrylate monomer. The nece...

introduction the purpose of the current study was to determine optical sensitivity of n-isopropyl acrylamide nipam and polyacrylamide gelatin and tetrakis hydroxymethyl phosphoniun chloride (pagat) polymer gels for different wavelength of visible light spectrum applied in optical computed tomography method. materials and methods nipam and pagat polymer gels with conventional formulations used f...

Theoretical and experimental aspects of an extrinsic optical-fiber ultrasound sensor are described. The sensor is based on a thin transparent polymer film acting as a low-finesse Fabry-Perot cavity that is mounted at the end of a multimode optical fiber. Performance was found to be comparable with that of a piezoelectric polyvinylidene dinuoride-membrane (PVDP) hydrophone with a sensitivity of ...

Introduction The purpose of the current study was to determine optical sensitivity of N-isopropyl acrylamide NIPAM and polyacrylamide gelatin and tetrakis hydroxymethyl phosphoniun chloride (PAGAT) polymer gels for different wavelength of visible light spectrum applied in optical computed tomography method. Materials and Methods NIPAM and PAGAT polymer gels with conventional formulations used f...