Electricity generation in thermal power plants as the largest producer of electricity in Iran is associated with greenhouse gas emissions. In this paper, using the Malmquist-Luenberger method, green productivity, and efficiency changes are measured for 31 thermal power plants (including 12 steam power plants, 13 gas power plants, and six combined cycle power plants) during 2009-2016. The result...

Fischer–Tropsch technology has gathered renewed interest in the energy industry in recent times for synthesis of diesel and gasoline. The synthesis of linear hydrocarbon diesel fuel (having high cetane number) through Fischer–Tropsch synthesis (FTS) reaction requires syngas with high H2/CO molar ratio. Producer gas obtained from biomass gasification has low H2/CO ratios, with significant conten...

A low SV causes relatively slow pyrolysis conditions at around 600°C, and produces high yields of charcoal 20-30%, large quantities of unburned tars, and a gas with high hydrocarbon content and high tar (volatile) content. A high SV causes very fast pyrolysis, producing less than 10% char-ash at 1050 C and hot gases at 1200-1400 C in the flaming pyrolysis zone. These gases then react with the r...

Thermochemical biomass conversion systems have the potential to produce heat, power, fuels and other products from forest biomass at distributed scales that meet the needs of some forest industry facilities. However, many of these systems have not been deployed in this sector and the products they produce from forest biomass have not been adequately described or characterized with regards to ch...

The gasification of pine and mixed-hardwood chips has been carried out in a pilot-scale system at a range of gas flow rates. Consuming w17e30 kgh 1 of feedstock, the producer gas was composed of w200 dm m 3 carbon monoxide, 12 dm m 3 carbon dioxide, 30 dm m 3 methane and 190 dm m 3 hydrogen, with an energy content of w6 MJ m 3 for both feedstocks. It was found that the efficiency of the system ...