The tangential contact forces that arise at the interface between the wheel of a railway vehicle and the rail provide all the traction, braking, and guidance required by the vehicle. These forces are the result of microslip or creepage and can become unstable exciting vibration of the wheel, particularly at frequencies corresponding to the wheel’s axial (and radial) modes. Although theories exi...

Increased patronage of railways in the UK in the past 20 years has put demands on rolling stock to operate at peak availability with reduced time available for maintenance. One possible tool to enable this is the use of real time fault detection and diagnosis on board railway vehicles to detect faulty components and provide information about the current running condition of the system. This pap...

This paper presents the development of control strategy for the active steering of railway vehicles with independently rotating wheelsets. The primary objective of the active steering is to stabilize the wheelset and to provide a guidance control. Some fundamental problems for active steering are addressed in the study. The developed controller is able to maintain stability and good performance...

This paper presents the responses of the railway vehicle and track components in terms of contact forces and displacements. The considered vehicle model is a five-DOF pitch-plane lumped parameter quarter car model supported on two-dimensional track systems comprising three layers. The car body is linked with the vehicle bogie through secondary suspension springs and damper elements, which is fu...

Increased railway patronage worldwide is putting pressure on rolling stock and infrastructure to operate at higher capacity and with improved punctuality. Condition monitoring is seen as a contributing factor in enabling this and is highlighted here in the context of rolling stock being procured with high capacity data buses, multiple sensors and centralised control. This therefore leaves scope...

Wheel profile is a very important factor that helps the steering performance of railway vehicle. However, during operation, wheel tends to vary inconsistently due frictional contact at wheel-rail interface. This paper focuses on problem wheelset and its alteration affects Signal-based indirect estimation technique using Fast Fourier Transform (FFT) proposed establish relationship between dynami...

The interaction between the wheel and rail greatly influences the dynamic response of railway vehicles on the track. A roller rig facility can be used to study and monitor real time parameters that influence wheel-rail interaction such as wear, adhesion, friction and corrugation without actual field tests being carried out. This paper presents the development of the mathematical models for full...

Abstract Railway wheels are commonly made from medium carbon steels (~0.55 wt.% C), heat treated to a near pearlitic microstructure with 5–10% pro-eutectoid ferrite. During the operation of freight trains, where block brakes used, high thermal loads occur together contact stresses, which combined can affect mechanical properties material. In this study, effects annealing on local and in railway...