The Eaton (Hopewell) Furnace located near Struthers, Ohio was built in 1802-1803. The first blast furnace west of the Alleghenies and the first industry of any kind in the Western Reserve, it went out of blast circa 1808 due to a combination of factors and fell into ruin. Historical sources on the Eaton are scarce and informational sources are vague, but archaeological excavations carried out i...

In our installation at AB Sandvik Materials Technology, we have shown that by using a nondestructive UWB Radar technique it is possible to visualize in real-time the ongoing process inside the furnace behind a 0.5 m thick ceramic wall. Since the operating temperature inside the furnace is 1200 C, there is today no other known method capable of visualizing the process for the operator of the fu...

As a valuable byproduct of iron-making process, blast furnace slag contains tremendous amount of sensible heat. Granulation of blast furnace slag is the first step for its heat recovery. Due to environmental and energy issues, dry centrifugal granulation has received a considerable amount of attention. However, the flight dynamics of blast furnace slag, which is of great importance for size des...

Cd, Cr, Mn, Ni, Pb, and Zn behaviour during sewage sludge incineration was investigated in seven pilot tests using a circulating fluidised bed furnace. Dewatered sludge at a solids concentration of 15-18% was fed to the furnace either alone (two tests) or spiked with chlorinated organic compounds (five tests). The behaviour of metals in the fluidised bed furnace was studied by comparing metal c...

Research is made into the fuzzy control of electrode regulator systems of submerged electrical arc ferrosilicon furnace EAF. The equations of the electrode currents and furnace resistances are derived based on certain model for the submerged arc ferrosilicon furnace. This model takes into consideration the walls of furnace and the heat losses into external medium in addition to the heat transfe...

An algorithm has been developed for the non-destructive determination of local thickness of the refractory material walls in smelter furnaces. This method uses measurements of temperature and heat flux at a number of points on the outer (fixed) surface of the furnace and assumes that the inner (guessed) surface of the furnace wall is isothermal. The temperature field is then predicted in the fu...

Absrract This paper presents a practical application of the conventional multi-loop control method for the temperature control of a television glass furnace. To control the temperature of the TV glass furnace, major input-output variables are selected, and simple FirstOrder-Plus-Dead-Time(F0PDT)models are established with the process experimental data. Based on the FOPDT models, a multi-loop. c...

Modern trends in iron metallurgy. Global carbon emissions from iron production. New solution for iron and steelmaking in a way reduce the CO2 emission to the level, where this might be needed in the post Kyoto period. New blast furnace technology, which operate with very low CO2 emissions based on drastically reduced consumption of carbon containing input materials. Injection of reducing gases ...

steel slags are the by products of steel industries, which forms during reduction process of iron melting. the chemical composition of it changes depending to the melting procedure. its mineralogical composition also varies based on the cooling procedure. two different types of steel slag were used as absorbing bed for various concentrations of pb2+ ions in the form of lead chloride, and the co...

background: in the steel industry, coke-fueled furnaces are used for smelting iron ore to produce cast iron are considered as sources of annoying noise.this study aims to evaluate the noise pollution blast furnace and sound source characteristics in order to present noise control measures in the steel industry. methods: measurement of noise level and its frequency analysis was performed using s...