This paper presents implementations of a nonisolated, high voltage gain DC-DC converter. High voltage gain is achieved due to inclusion of resonance and transformer in the circuit. The performance of this converter is compared with two similar topologies namely coupled inductor-switched capacitor step-up converter and coupled inductor step-up converter. The proposed prototype is designed using ...

This paper presents an interleaved resonant converter to reduce the voltage stress of power MOSFETs and achieve high circuit efficiency. Two half-bridge converters are connected in series at high voltage side to limit MOSFETs at Vin/2 voltage stress. Flying capacitor is used between two series half-bridge converters to balance two input capacitor voltages in each switching cycle. Variable switc...

Conventional voltage mode control only offers limited performance for LLC series resonant DC-to-DC converters experiencing wide variations in operational conditions. When the existing voltage mode control is employed, the closed-loop performance of the converter is directly affected by unavoidable changes in power stage dynamics. Thus, a specific control design optimized at one particular opera...

Multi-port DC-DC converter has attracted special interest in applications where multiple energy sources are used. In this project, a three-port converter with three active full bridges, two LCC resonant tanks, and a three-winding transformer is proposed. It uses a single power conversion stage with high-frequency link to control power flow between batteries, load, and a renewable source such as...

This work presents a novel highly efficient and low-stress battery charger with a resonant switch converter— based on resonance and zero-voltage-transition soft-switching theory—that reduces defects associated with high voltage and high current stresses caused by the resonance of traditional resonant circuits. The novel battery charger meets the requirement that all circuit components must oper...

Abstract – Resonant parametric perturbation (RPP) method is an effective non-feedback method for controlling chaos. In this paper, the above method is applied for the current programmed buck-boost dc-dc converter which exhibits chaotic for wide parameter variations. The different possible operating regimes leading to chaotic operation of the current mode controlled buck-boost converter is discu...

This paper presents a nonisolated, high boost ratio hy-brid transformer dc–dc converter with applications for low-voltage renewable energy sources. The proposed converter utilizes a hy-brid transformer to transfer the inductive and capacitive energy simultaneously, achieving a high boost ratio with a smaller sized magnetic component. As a result of incorporating the resonant operation mode into...

To improve the energy quality, most of the renewable energy systems include an energy storage element charged by the bidirectional DC-DC converter. This paper proposes the bidirectional DC-DC converter which employs the two bridge configuration resonant class-E converters on the both sides of the isolating transformer. The low side converter is controlled as step up and the high side converter ...

From previous discussion, the power stage could be designed according to the given specifications. The outcome of the design is the desired values for the components. For these components, power devices and capacitors are obtained from manufactures, which already reflect the state of the art technology. Within all these components, magnetic is the one need to be physically designed and built by...

Abstract.A novel single-stage high-power-factor electronic ballast obtained from the integration of a forward dc-to-dc converter and a half-bridge resonant inverter is evaluated in this paper. The Forward converter is operated in discontinuous conduction mode and constant frequency providing an input power factor high enough to satisfy present standard requirements. The operation of the propose...