This paper describes a semi-active vibration absorber (SVA) concept based on a real-time controlled magnetorheological damper (MR-SVA) for the enhanced mitigation of structural vibrations due to harmonic disturbing forces. The force of the MR damper is controlled in real-time to generate the frequency and damping controls according to the behaviour of the undamped vibration absorber for the act...

damping of a full-scale cable with a pair of passive–on magnetorheological (mr) dampers was tested. a cable of 215.58m long with the first mode frequency of 0.658hz was tensioned horizontally in cable prefabrication factory. two mr dampers were attached to the cable in an angle in the plane perpendicularly to the cable axis in 5m length from the cable anchorage. the applied voltage level was 0v...

magnetorheological (mr) dampers have the advantage of being tuned by low voltages. this has attracted many researchers to develop semi-active control of structures in theory and practice. most of the control strategies first obtain the desired forces of dampers without taking their dynamics into consideration and then determine the input voltages according to those forces. as a result, these st...

The objective of this paper is to study the performance of a sixth order polynomial approach to model hysteresis behaviour of a magnetorheological (MR) damper under harmonic excitations. The polynomial model is developed based on curve fitting from the experimental results and consists of a pair subsystem namely positive and negative acceleration which correspond to the upper and lower curves. ...

In this study, control performance of a smart base isolation system consisting of a friction pendulum system (FPS) and a magnetorheological (MR) damper has been investigated. A fuzzy logic controller (FLC) is used to modulate the MR damper so as to minimize structural acceleration while maintaining acceptable base displacement levels. To this end, a multi-objective optimization scheme is used t...

Magneto-rheological damper is a nonlinear system. In this case study, system has been identified using Neural Network tool. Optimization between number of neurons in the hidden layer and number of epochs has been achieved and discussed by using multilayer perceptron Neural Network.

In this study, the adaptability of a semi-active top-story isolation system with an MR damper for reduction of seismic responses of tall buildings has been investigated. To this end, a 20-story building structure was selected as an example. Low damping elastomeric bearings and an MR damper were used to compose a smart top-story isolation system. Artificial earthquakes generated based on design ...

In order to address the problem that traditional passive suspension damping parameter cannot be adjusted which makes it difficult to improve vehicle ride comfort and handling stability, the paper proposes use of controllable magneto-rheological dampers in replace of passive dampers to establish semi-active suspension based on magneto-rheological dampers. By designing magneto-rheological damper ...

A new self-powered and sensing semi-active control system based on magnetorheological (MR) damper is presented. The system includes four key parts: a rack and pinion mechanism, a linear permanent magnet DC generator, a current adjustment MR damper, and a control circuit. Numerical simulations for seismic protection of elevated bridges equipped with this system excited by two historical earthqua...

The design of a passivity based control law with interconnection and damping assignment to attenuate motion of a building seismically excited is presented. The actuator is a magneto-rheological damper placed between ground and first story. Significant motion reduction is attained when compared with the case of building free response. Copyright c ©2005 IFAC.