Over the years, many materials have been used as fillers in rubber compounds. In this sense, filler is a diluent and is used primarily to lower volume cost. With use, all fillers modify certain physical properties of the compound in addition to lowering cost. Therefore, lower cost is generally achieved at the expense of other desirable properties and all compounds are compromises with various t...

Through direct comparisons with experiments, Lefèvre et al. (Int. J. Frac. 192:1– 23, 2015) have recently confirmed the prevailing belief that the nonlinear elastic properties of rubber play a significant role in the so-called phenomenon of cavitation—that is, the sudden growth of inherent defects in rubber into large enclosed cavities/cracks in response to external stimuli. These comparisons h...

coeffcient of  friction  (cof)  for  rubber parts  is one of  the key parameters in their interaction with solid rough surfaces (micrometer to millimeter scales),  such  as  tire-road  interactions. cof  of  rubber  depends  on  viscoelastic properties of rubber, roughness characteristics of the counter-part surface, and process variables such as contact nominal pressure and sliding speed. due ...

A comparative study on biodegradation of di-cumyl peroxide (DCP) crosslinked and uncrosslinked natural rubber by Pseudomonas sp. was carried out. Decrease in organic carbon content along with the changes in tensile strength of the treated rubber, both DCP crosslinked and uncrosslinked natural rubber, indicated rubber hydrocarbon utilization by the Pseudomonas sp. A decrease in 60.88% MPa and 41...

since reusing waste tire as a cheap filler is considerably high, in this study, recycled rubber to replace nr/br is used up to 15 phr and the positive and negative aspects of the rubber powder and reclaimed rubber in the physical, dynamical and processing properties are evaluated. the results showed that in the presence of recycled rubber, the cure rate, crack growth resistance, tear strength a...

Natural rubber (NR) latex collected from the Hevea trees exists as a colloidal suspension (Verhaar, 1959). The amount of latex obtained on each tapping is about 300 mL. The tapping is usually done once every 2–3 days for 9 months each year. Usually, the collected latex is treated with formic acid to coagulate the suspended rubber particles within the latex (Gazeley et al., 1988). After having b...

The aim of this study was to compare the isolation systems OptraDam® Plus and OptiDam™ with the conventional rubber dam in terms of objective and subjective parameters. The isolation systems were applied during the dental treatment of the patients. The time of preparation, placement, presence and removal were measured and the quality of isolation was evaluated. The median time of rubber dam pla...

Optimum conditions for the rapid, efficient, nondestructive determination of rubber producing potential in guayule (Parthenium argentatum) were established. The rubber producing potential may be defined as the ability of the plant material to synthesize rubber from a precursor under specified conditions. To achieve this, stem slices taken from the first 5 centimeters of branches were incubated ...

Natural rubber was extracted from the fig tree (Ficus carica) cultivated in Korea as part of a survey of rubber producing plants. Fourier transform infrared and (13)C nuclear magnetic resonance analysis of samples prepared by successive extraction with acetone and benzene confirmed that the benzene-soluble residues are natural rubber, cis-1,4-polyisoprene. The rubber content in the latex of fig...

Abstract Epoxies as a thermoset polymer have got great attention in different applications. To elaborate their employing and surmount brittleness, many polymers were blended with them. The results confirm that the good mechanical properties are obtained when 6wt% of Polysulfide Rubber (PSR) is epoxy reinforced fiber glass. effect rubber glass on viscoelastic investigated using creep-recovery da...