This paper outlines the application of the multi-layer perceptron artificial neural network (ANN), ordinary kriging (OK), and inverse distance weighting (IDW) models in the estimation of local scour depth around bridge piers. As part of this study, bridge piers were installed with bed sills at the bed of an experimental flume. Experimental tests were conducted under different flow conditions an...

Turbulences in liquids caused by jets can be of interest for numerous applications. For one, it concerns flood spillway structures within civil engineering but also is key in any area where turbulent mixing is present. The numerical simulations of jets that impinge into plunge pools are still in an early phase of their development. This paper verifies the accuracy of the Flow-3D software packag...

Mohammad Muzzammil Department of Civil Engineering, AMU, Aligarh, UP 202002, India E-mail: [email protected] An accurate estimation of the maximum possible scour depth at bridge abutments is of paramount importance in decision-making for the safe abutment foundation depth and also for the degree of scour counter-measure to be implemented against excessive scouring. Despite analysis of...

Scouring around the bridge pier is a natural and complex phenomenon that results in failure. Failure of bridges have potential devastation public safety economic loss, which lead to political consequences environmental impacts. Therefore, it essential countermeasure scour pier. This paper studies effects four different airfoil-shaped collars (i.e., bc1 = 1.5b, bc2 2.0b, bc3 2.5b bc4 3.0b, where...

Bridge Scour is one of the major causes of bridge failures all around the world and there have been significant efforts for its detection and measurement using different acoustic approaches. In this paper, we propose and investigate an effective method to utilize Received Signal Strength (RSS) for measuring scour depth where acoustic sensors are deployed. We also extend a statistical testing to...

stable pile depth in the Snowy River study (SKM 2005) is outlined. The inputs used in the run of the LLP99 model were: • single soil layer, • very high flexural stiffness of pile (1,000,000 kN/m). • pile width = 0.3 m (i.e. wooden pile), • shear strength in the absence of lateral stress (for unconsolidated sand 150 kN/m was used), • effective unit weight of soil (15 kN/m), • active lateral effe...