In this article, high-speed photographic investigations of the dynamic crack initiation and propagation in several inorganic glasses by the impact of small spherical and conical projectiles are described. These were carried out at speeds of up to approximately 2×10(6) frames s(-1). The glasses were fused silica, 'Pyrex' (a borosilicate glass), soda lime and B(2)O(3). The projectiles were 0.8-2 ...

The generation and the subsequent evolution of dynamic failure events in homogeneous layered materials that occur within microseconds after impact were investigated experimentally. Tested configurations include three-layer and two-layer, bonded Homalite specimens featuring different bonding strengths. High-speed photography and dynamic photoelasticity were utilized to study the nature, sequence...

Abstract. Experiments were performed to observe the fracture behavior of thinwall and initially-flawed aluminum tubes to internal gaseous detonation loading. The load can be characterized as a propagating pressure jump with speed of 2.4 km/s and magnitude ranging from 2 to 6 MPa, followed by an expansion wave. Flaws were machined as external axial surface notches. Cracks ran both in the upstrea...

In situ ultrasonic methods for structural health monitoring have the potential to provide early detection of fatigue cracks in aircraft components, specifically cracks initiating from fastener holes. A dual angle beam technique based upon an incident shear wave and a spiral creeping wave propagating around the hole has been shown to be a viable configuration for monitoring of fastener hole crac...

Bone is more difficult to break than to split. Although this is well known, and many studies exist on the behaviour of long cracks in bone, there is a need for data on the orientation-dependent crack-growth resistance behaviour of human cortical bone that accurately assesses its toughness at appropriate size scales. Here, we use in situ mechanical testing to examine how physiologically pertinen...

This paper develops the extended finite element method (XFEM) to evolve patterns of multiple cracks, in a brittle thin film bonded to an elastic substrate, with a relatively coarse mesh, and without remeshing during evolution. A shear lag model describes the deformation in three dimensions with approximate field equations in two-dimensions. The film is susceptible to subcritical cracking, obeyi...

CRACKS in ductile single crystals are analyzed here for geometries and orientations such that twodimensional states of anti-plane shear constitute possible deformation fields. The crystals are modelled as ideally plastic and yield according to critical resolved shear stresses on their slip systems. Restrictions on the asymptotic forms of stress and deformation fields at crack tips are establish...

In this study,SGBEM Voronoi Cells (SVCs), with each cell representing a grain of the material at the micro-level, are developed for direct micromechanical numerical modeling of heterogeneous composites. Each SVC can consist of either a (each with a different) homogenous isotropic matrix, and can include micro-inhomogeneities such as inclusions, voids of a different material, and cracks. These i...

In the coal mining process, the destabilization of loaded coal mass is a prerequisite for coal and rock dynamic disaster, and surface cracks of the coal and rock mass are important indicators, reflecting the current state of the coal body. The detection of surface cracks in the coal body plays an important role in coal mine safety monitoring. In this paper, a method for detecting the surface cr...

This paper presents a method for predicting initial trajectories of propagation of two separate fatigue cracks, which are developed under two perpendicular cyclic loads with phase difference between them. Calculation of trajectories of these two initial cracks is the first step in prediction of trajectories and rate of propagation of long cracks. This problem is important for analysis of durabi...