Investigations were carried out to evaluate the performance of direct injection diesel engine with medium grade low heat rejection (LHR) combustion chamber and 3 mm air gap insulated piston, 3 mm air gap insulated liner, and ceramic coated cylinder head [ceramic coating with the thickness of 500 µ was made on the inside portion of the cylinder head].The engine had different operating conditions...

With modernization and increase in the number of automobiles worldwide, the consumption of diesel and gasoline has enormously increased. In this experiment tri fuel concept was used according to that diesel and turpentine different proportion bled introduced in diesel engine and acetylene entre in the diesel engine through intake manifold in the diesel engine. Among the many process parameters,...

Diesel engine emission standards are being more stringent as it gains more publicity in industry and transportation. Hence, designers have to suggest new controlling strategies which result in small amounts of emissions and a reasonable fuel economy. To achieve such a target, multi-objective optimization methodology is a good approach inasmuch as several types of objective are minimized or maxi...

this paper is the representation of the computational and experimental methods of a new injector nozzle for a sequential port injection cng engine. the objective of this study was to review the previous research in the development of gaseous fuel injector for port injection cng engine converted from diesel engine. next, a simulation of the fuel flow of the new injector nozzle was made using flu...

A large number of non-stationary dynamic signals are generated in the working machinery and equipment. Especially, diesel engines often encounter non-stationary transient and time-varying modulation signals, such as the impulse response signals caused by cylinder piston wear. These kinds of signals generated from diesel engine are analyzed by the method of the Local Wave time-frequency proposed...

In this paper, the control scheme of a Liquefied Petroleum Gas (LPG)–diesel dual-fuel engine with electronic control is illustrated, the external characteristics and load characteristics of the LPG– diesel dual-fuel engine and the diesel engine are compared and analyzed. The experimental results show that, compared with diesel, the output performance of dual fuel is not reduced, while smoke emi...

As part of the VECTIS code validation programme, CFD simulations were conducted to investigate direct-inject (DI) diesel engine combustion with the newly implemented Ricardo Two-Zone Flamelet (RTZF) combustion model. A small HSDI research engine was chosen as subject. The simulation programme consisted of 6 cases forming a complete injection time swing. CFD simulation results were compared dire...

Nano-additives blended water-diesel emulsion fuel is the alternative fuel for compression ignition (CI) engine that reduce the NOx emission and at the same time increase the brake thermal efficiency due to combined effect of nanoparticles and micro explosion phenomenon of water diesel emulsion. This review paper addresses emulsion, emulsion types, micro-explosion phenomenon of water-diesel emul...

A direct injection (DI) diesel engine is tested with different biodiesel-diesel blends, such as B0 (neat diesel), B5 (i.e., 5 vol. % biodiesel and 95 vol. % diesel), B10 (10 vol. % biodiesel), B20 (20 vol. % biodiesel), B50 (50 vol. % biodiesel), and B100 (neat biodiesel) for performance and emissions under different load conditions. Engine performance is examined by measuring brake specific fu...

This study discusses the suitability of iso-butanol/diesel fuel blends as an alternative fuel and determines their effects on the performance and combustion characteristics of a heavy-duty diesel engine. For this purpose, various isobutanol/diesel fuel blends containing 5%, 10% and 15% iso-butanol were prepared in volume basis and tested in a turbo-charged, six-cylinder direct injection diesel ...