The effect of curing agent (6610) content and temperature on the rheological behavior of the epoxy resin CYD-128 was studied by DSC analysis and viscosity experiments. The results show that the resin system meets the requirements of processing technology. A complete reaction occurs when the curing agent content (40 parts per hundred resin, phr) is a little higher than the theoretical value (33....

Flue-curing is a post harvest conditioning process which strongly affects the tobacco leaf chemistry, and consequently the chemical properties of tobacco smoke. Several studies identified the major changes in tobacco chemistry occurring during flue-curing. It is not known how flue-curing contributes to changes in bioactivity of cigarette smoke condensate (CSC). In this study, tobacco leaves col...

Different types of curing compounds were applied to lab and field concrete at different times after casting. Two application methods, single and double layer applications, were employed. Concrete properties, such as electrical conductivity, moisture content, sorptivity, degree of hydration, strength, and permeability were evaluated, and the results were employed for assessment of the curing eff...

Today concrete is most widely used construction material due to its good compressive strengt h and durability. Depending upon the nature of work the cement, fine aggregate, coarse aggregate and water are mixed in specific proportions to produce plain concrete. Plain concrete needs congenial atmosphere by providing moisture for a minimum period of 28 days for good hydration and to attain desired...

Objective: To assess a multiple emission peak light-emitting-diode (LED) light-curing unit (LCU) by measuring the polymerization efficiency through the degree of conversion (DC) and Knoop microhardness (KH) of a resin-based pit and fissure sealant at various light curing times and two distances compared to a single emission peak LED LCU. Method: Sixty disks of a resin-based pit and fissure seal...

Various methods of toughening the bonding between the interleaf and laminate glass fiber reinforced polymer (GFRP) have been developed due to the increasing applications in industries. A polystyrene (PS) additive modified epoxy is used to improve the diffusion and precipitation region between polysulfone (PSU) interleaf and epoxy due to its influence on the curing kinetics without changing glas...

A new approach is outlined in which group modeling techniques are used to model an individual user. This helps to reduce cold-start problems, and allows aggregating multiple criteria.

15. Supplementary Notes Project performed in cooperation with the Texas Department of Transportation and the Federal Highway Administration. 16. Abstract Curing has substantial effects on the long-term performance of Portland cement concrete (PCC) pavement. TxDOT requires two applications of curing compounds, with a maximum 180 sf/gal per each application. However, no compliance testing is cond...

AIM The aim of this study was to evaluate the heat generation of three different types of light curing units. METHODS AND MATERIALS Temperature increases were recorded from a distance of 1 mm from a thermocouple to the tip of three different types of light curing units including one quartz-tungsten halogen (QTH), one plasma arc (PAC), and one light emitting diode (LED) unit. An experimental m...