The design of tall buildings essentially involves a conceptual design, approximate analysis, preliminary design and optimization, to safely carry gravity and lateral loads. The design criteria are, strength, serviceability, stability and human comfort. The strength is satisfied by limit stresses, while serviceability is satisfied by drift limits in the range of H/500 to H/1000. Stability is sat...

December 2000 OVERVIEW Post-tensioning is a method of reinforcing (strengthening) concrete or other materials with high-strength steel strands or bars, typically referred to as tendons. Post-tensioning applications include office and apartment buildings, parking structures, slabs-on-ground, bridges, sports stadiums, rock and soil anchors, and water-tanks. In many cases, posttensioning allows co...

cast connections. ABSTRACT: Diagonal bracings are extremely popular elements for lateral load resistance in steel-framed buildings. In turn, the most common shape used for bracing members is the hollow structural section. While the design of such members is straight-forward, the design of gusset-plate connections at the member ends is controversial. This paper reviews the current ‘state-of-the-...

In this paper, we address a new technique for automatic construction of steel structure in high-rise buildings termed RCA system (Robotics & Crane based Automated Construction System). RCA system can be divided into four core systems: 1) Monitoring and control system, 2) Material assembly system, 3) Beam assembly system, 4) Construction Factory (CF) system. Through our research, we expect that ...

While high-rise construction serves as one of the most challenging projects undertaken by society each year, tall buildings are one of the few constructed facilities whose design relies solely upon analytical and scaled models, which, though based upon fundamental mechanics and years of research and experience, have yet to be systematically validated in full-scale. In response to this deficienc...

a large number of bridges and buildings that are currently used, are made of slabs with opening. some of these buildings and bridges have been severely damaged because of natural disasters such as earthquake, storm and other effects such as materials fatigue and alkaline and corrosive agents. therefore, retrofitting and strengthening of these structures is essential and affordable. in this rese...

Lightweight cold-formed steel (CFS) framing is an effective building solution for low and mid-rise structures. However, systems level response and component contributions as well as their interactions such as those from lateral-load resisting systems, floor diaphragms, studs to track connections, etc., are not fully understood. Existing building codes for the CFS frame buildings are based solel...

Residual drifts after severe earthquakes interrupt serviceability of buildings. Retrofitting of such buildings is in many cases very difficult and consumes lots of time and money. Recently, there are some attempts to develop the seismic design procedures to not only satisfy life safety criteria but also lead to more economical buildings. One of these modern methods of improving seismic performa...

In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...

The floor beams of steel buildings, cold-formed steel floor joists in particular, often require large web openings, which may affect their shear capacities. A cost effective way to mitigate the detrimental effects of such openings is to weld/fasten reinforcements. A difficulty associated with an experimental investigation to establish suitable reinforcement schemes for openings in shear zone is...