Large diameter steel line pipes are generally produced by cold deforming hot rolled or thermomechanically controlled rolled (TMCR) plate by the three-stage 'UOE' process. Pipe strength has been found to increase or decrease relative to the plate, depending on the steel grade and plate processing history. The strength increase is due to work hardening whereas any decrease in strength arises from...

Composite materials are widely recognized as a resource for repairing damaged pipelines. The fibers in conventional composite repair systems typically incorporate E-glass and carbon materials. To provide greater levels of reinforcement a system was developed that incorporates steel half shells and an E-glass composite repair system. In comparison with other competing composite technologies, the...

There are a wide range of important applications for metal tube materials in various fields. The production process of high-frequency longitudinally welded pipe includes first using a roller to coil the long steel strips of a certain size into a cylinder shape, and then join them by heating the steel materials at the welding edge with a high-frequency welding machine — Fig. 1. The processes inc...

The purpose of this paper is to understand the mechanism of non-axisymmetric wall-thinning that caused a pipe break in the pipeline of the Mihama nuclear power plant in 2004. The wall thinning was caused by the flow accelerated corrosion which affects low carbon steel pipelines. The mass transfer rate measurement of the wall thinning behind an office in a curved swirling flow is carried out in ...

There are three forces acting on the valve plate: the force of the escaping air Fv, the force of the steel spring Fs and the pneumatic damping force due to the pressure of the air in the dashpot Fd. Each of these forces varies with distance x. These interact with the valve mass and the pipeline dynamics to produce instability. Perturbations in the pressure travel along the pipe at the sonic vel...

The segregated flow pattern, which occurs in a 26.1 mm diameter, horizontal, stainless steel test section, is investigated. Pressure gradient and in situ phase distribution data were obtained for different combinations of phase superficial velocities ranging from 0.05 m·s 1 to 0.96 m·s . For the current small Eötvös number liquid-liquid system (EoD 4.77), the dominant effect of interfacial tens...

The aim of this paper is numerical and experimental study of the effects of flow hydraulics, pipe structure (particularly elastic behaviour) and submerged jet on leak behaviour. In this regard, experimental tests were performed on a high-pressure circulation set up. Experiments were performed on an old steel pipe and a High Density Polyethylene (HDPE) pipe discharged to the atmosphere in a wide...

This paper discusses the development and implementation of a new ergonomic manual control system for a large construction manipulator. The manipulator consists of a 22 ton rough terrain hydraulic crane with a multifunction manipulator attachment. The combined device gives a single operator hydraulic control over eight independent joint axes allowing for dextrous positioning of large sections of...

In this paper, a wave propagation model is developed to investigate the wave propagation in fluid-filled steel pipe. Based on the Kennard shell equations the investigation is achieved under the conditions of coupling between the shell elastic acoustic field and the interior fluid acoustic field. Tests are conducted on fluid-filled pipeline blockage detection. An active acoustic source is used t...