OBJECTIVES To evaluate the viscoelastic properties of demineralized dentin matrix. Stress-relaxation studies were done on matrices in tension and strain elongation or creep studies were done in both tension and compression. METHODS Mid-coronal dentin disks were prepared from extracted unerupted human third molars. Disks were 0.5 mm thick for stress-relaxation or tensile creep experiments and ...

Indentation creep tests and finite element simulations were performed on a model material to show that the constitutive equation for conventional uniaxial creep can be derived using the instrumented indentation testing technique. When the indentation pressure and the indentation creep rate are maintained at constant values of ps and _ 3⁄4inðsÞ, respectively, the contours of the equivalent stres...

This paper addresses the viscoelastic behaviour of a commercially available cold-curing structural epoxy adhesive, under different preparation, curing and hygrothermal conditions. The main parameters studied were preparation method (influence degassing temperature initial curing), creep stress level, Tensile tests last up to 2400 h. Test results revealed that has great influence on tensile prop...

The ability to estimate the likelihood of given earthquake magnitudes is critical for seismic hazard assessment. Earthquake magnitude-recurrence statistics are empirically linked stress, yet which fault-zone processes explain this link remains debated. We use numerical models reproduce interplay between viscous creep and frictional sliding a fault-zone, inter-seismic locking becomes stress. emp...

During the flood development in an oil field, the creep characteristic of mudstone is one of the important factors causing casing damage. In this study, based on the theory of fractional order differential and taking into account the creep damage evolution rules, a fractional nonlinear creep-damage model is proposed to reflect the instantaneous deformation in loading processes and the accelerat...

In order to characterize the creep behaviors of 2219 aluminum alloy at different temperatures and stress levels, a RWS-50 Electronic Creep Testing Machine (Zhuhai SUST Electrical Equipment Company, Zhuhai, China) was used for creep experiment at temperatures of 353~458 k and experimental stresses of 130~170 MPa. It was discovered that this alloy displayed classical creep curve characteristics i...

The compressive creep and the recovery of commercially available composites, 2 kinds for posterior and 2 kinds for anterior use, in water were examined. In posterior composites, creep strain after 500h at a stress level of 8.3 kgf/mm2 was significantly small (within 1%). The results of the compressive creep test showed that posterior composites would be resistant to occlusal stress. Creep strai...

Tensile stress develops in concrete when shrinkage deformations and restraints (internal or external) exist. Utilization of appropriate creep or relaxation functions is crucial for assessing stress and the associated cracking potential in concrete, especially at early ages when chemical and physical properties change rapidly. The existing models, developed either from compressive creep tests or...

Tensile and creep properties of new austenitic steel Sanicro 25 at room temperature and operating temperature 700 °C were investigated by testing on miniature specimens. The results were correlated with testing on conventional specimens. Very good agreement of results was obtained, namely in yield and ultimate strength, as well as short-term creep properties. Although the creep rupture time was...