Asphalt concrete is a heterogeneous material composed of aggregates, binder cement, and air voids, and may be described as a cemented particulate system. The load carrying behavior of such a material is strongly related to the local load transfer between aggregate particles, and this is taken as the microstructural response. Simulation of this material behavior was accomplished using a finite e...

resilient modulus of pavement materials is a key property required for the pavement thickness design. this paper describes the results of an experimental study on the effects of temperature and loading frequency on the resilient modulus of a sbs polymer modified asphalt concrete under dry and saturated conditions. dynamic creep tests were conducted on dry and saturated specimens of the mixture ...

Permeability of an asphalt pavement is one of the most important parameters that have a direct influence on its design life. It is an intrinsic property that relates the average fluid velocity to a constant pressure gradient; however, the external pressures on a saturated pavement pore structure are often dynamic due to the repeated tire loading in the field. A dynamic permeability constant, th...

The recent boom in construction activities and the continued urban development in Kuwait have resulted in the generation of massive quantities of construction/demolition material by-products that need to be removed from construction/demolition sites in the cities to landfill areas which are limited in the country. This paper explores the possibility and benefits of utilizing by-product material...

This doctoral thesis consists of a literature review, presented in two papers, and another six papers describing experimental studies of the influence of different kinds of wax and polyphosporic acid on bitumen and asphalt concrete mixture properties. The literature review should give an extensive description of the field of knowledge concerning wax in bitumen. Effects of wax in crude oil, bitu...

The objective of this study is to review existing literature in the area of nano-modification of asphalt and proceed to apply nano-materials to asphalt to improve the performance. This study integrates literature review, preparation, and characterization of nano-modified asphalt materials. In the experimental testing montmorillonite, nanoclay at 2% and 4% by weight of asphalt was blended in asp...

Hydrogen Sulfide. Hydrogen sulfide (H2S) is a colorless gas with a characteristic odor of rotten eggs. It naturally occurs in the gases from volcanoes, sulfur springs, undersea vents, swamps, stagnant bodies of water, and in crude petroleum and natural gas. Additionally, bacteria, fungi, and actinomycetes release hydrogen sulfide during the decomposition of sulfur-containing proteins and by the...

a r t i c l e i n f o Cold recycling technique represents the most environmental friendly solution for pavement rehabilitation nowadays. In fact, this technique allows the use of the highest percentage of reclaimed asphalt avoiding the energy consumption related to aggregates heating required by the traditional hot mix asphalt design. The mix design represents a key phase of the cold mix produc...

Solid waste management is one of the major environmental concerns in the United States. Over 5 billion tons of non-hazardous solid waste materials are generated in USA each year. Of these, more than 270 million scrap-tires (approximately 3.6 million tons) are generated each year. In addition to this, about 300 million scrap-tires have been stockpiled. Several studies have been carried out to re...