The structure and microhardness of Cu-Ta joints produced by explosive welding were studied. It was found that, during explosive welding, an intermediate layer 20⋯40  μ m thick with a finely dispersed heterophase structure, formed between the welded copper and tantalum plates. The structure of the layer was studied by scanning and transmission electron microscopy. Microvolumes with tantalum part...

The hydrogen permeability of bulk tantalum and tantalum coated with thin films of palladium was measured at temperatures from 623 to 1173 K and hydrogen partial pressures from 0.1 to 2.6 MPa in a flowing gas system. Palladium coatings were deposited by both electroless plating (1–2 m thick Pd layer) and cold plasma-discharge sputtering with two different thicknesses, 0.04 or 1.2 m. All samples ...

Solid-electrolyte tantalum capacitors were first developed and commercially produced in the 1950s. They represented a quantum leap forward in miniaturization and reliability over existing wound-foil wet electrolytic capacitors. While the solid tantalum capacitor has dramatically improved electrical performance versus wet-electrolyte capacitors, especially at low temperatures, today’s electronic...

Tantalum oxide memristors can switch continuously from a low-conductance semiconducting to a high-conductance metallic state. At the boundary between these two regimes are quantized conductance states, which indicate the formation of a point contact within the oxide characterized by multistable conductance fluctuations and enlarged electronic noise. Here, we observe diverse conductance-dependen...

In this work we synthesized well-ordered, Ta2O5 films with a 3D-interconnected gyroid mesopore architecture with large pore sizes beyond 30 nm and extended crystalline domains through self-assembly of tailor-made triblock-terpolymers. This has effectively eliminated diffusion limitations inherent to previously reported mesoporous photocatalysts and resulted in superior hydrogen evolution with a...

Porous tantalum is a biomaterial that was recently introduced in orthopaedics in order to overcome problems of the past related to implant loosening. Its use has led to very good results, especially in difficult cases where severe bone defect is present, as it is found to have osteoconductive and possibly, osteoinductive properties. So, it is of great interest to shed light to the mechanisms th...

— Tantalum oxide (Ta 2 O 5) films are of considerable interest for a range of application, including optical waveguide devices, high temperature resistors, and oxygen sensors. In this paper, we establish an anode oxidation process of tantalum thin film. The voltage drop in the electrolyte is affected not in voltage change but in current change. If the voltage drop in the electrolyte is same wit...