Mechanically sensitive nociceptor afferents were studied in a preparation of isolated skin from rat leg. Each neuron was studied while the skin was subjected to tensile and compressive loading. The experiment was designed to create highly uniform states of stress in both tension and compression. Tensile loads were applied by pulling on the edges of the sample. Applied loads were used to determi...

The tensile creep behavior is extremely important in crack prediction and stress analysis of concrete. The main objective is investigating the effects of the silica fume on the tensile basic creep of early-aged concrete. The effect of silica fume on tensile creep was studied using lever-type tensile creep tester. Silica fume amount by weight of total cementing material was 0%, 5%, 10% and 15%. ...

The purpose of this study was to investigate the effects of the location and orientation of dentinal tubules in the tooth on tensile strengths of the dentin. Dumbbell-shaped specimens of 12 groups from various locations and dentinal tubule orientations were prepared. The tensile test was performed in distilled water at a temperature of 37 degrees C. The tensile strengths of the parallel to the ...

Cell monolayers on culture dishes were divided into two groups: tensile monolayers and non-tensile ones. In the development of an epithelium, a non-tensile cell monolayer turns into a tightly bound tensile one. Detection of these states was carried out by using the boundary shortening procedure, a computer-based geometrical method to show how much the polygonal cell boundary contracts. Non-tens...

Abstract: The Quasi-static mechanical properties of hybrid fiber (steel fiber and Polyvinyl alcohol (PVA) fiber) reinforced cementitious composites (HFRCC(SP)) were investigated by compressive and tensile experiments. The compressive strength, peak strain, elastic modulus and tensile strength are studied as compared with that of engineered cementitious composite (ECC). Study results indicate th...

assessment of the correlation between rock brittleness and rock fracture toughness has been the subject of extensive research works in the recent years. unfortunately, the brittleness measurement methods have not yet been standardized, and rock fracture toughness cannot be estimated satisfactorily by the proposed indices. in the present study, statistical analyses are performed on some data col...

Aalto University, P.O. Box 11000, FI-00076 Aalto www.aalto.fi Author Jouko Lehto Name of the doctoral dissertation Reinforcement ability of mechanical pulp fibres Publisher School of Chemical Technology Unit Department of Forest Products Technology Series Aalto University publication series DOCTORAL DISSERTATIONS 47/2011 Field of research Paper and Printing Research Manuscript submitted 2 Novem...

Aiming at demonstrating the potential of unidirectional natural fiber-reinforced thermoplastic composites in structural applications, textile flax yarn/thermoplastic polyester composites with variable fiber volume fractions have been manufactured by a filament-winding process followed by a vacuum-assisted compression molding process. The microstructure of the composites shows that the flax fibe...

The stabilization of slopes by vegetation has been a topical issue for many years. Root mechanical characteristics significantly influence soil reinforcement; therefore it is necessary to research into the indicators of root tensile properties. In this study, we explored the influence of root moisture content on tensile resistance and strength with different root diameters and for different tre...

Rapid heat cycle molding (RHCM) is a special molding process capable of producing molded plastic parts with high surface quality and improved weldline strength and appearance. This study investigated the influence of the weldline on the tensile strength of RHCM and conventional injection molded (CIM) components. The test specimens with and without a weldline were cut from RHCM and CIM parts for...