Kenaf bast fiber (KBF) filled plasticized poly(lactic acid) (p-PLA) composites was prepared and examined stage by stage in this study. Firstly, poly(lactic acid) (PLA) was plasticized with 5 up to 20 wt% poly(ethylene glycol) (PEG) via internal mixer. Blend with 10 wt% PEG was chosen as matrix for composite as it showed the best impact strength and elongation at break. Secondly, maleic anhydrid...

This paper presents the results of thermo-mechanical characterization of Glass/Epoxy composite specimens using Infrared Thermography technique. The specimens used for the study were fabricated in-house with three different lay-up sequences and tested on a servo hydraulic machine under uni-axial loading. Infrared Camera was used for on-line monitoring surface temperature changes of composite spe...

A comprehensive all-atom molecular-level computational investigation is carried out in order to identify and quantify: (i) the effect of prior longitudinal-compressive or axial-torsional loading on the longitudinaltensile behavior of p-phenylene terephthalamide (PPTA) fibrils/fibers; and (ii) the role various microstructural/topological defects play in affecting this behavior. Experimental and ...

Hydrocode simulations were conducted to analyze the non-linear response of 1100-O aluminum plates with semi-circular notches. Plates with constant notch depth and notch root radius were loaded (normal to the notch-tip plane) to the same shock stress while the notch spacing was varied. The resulting stress distributions were analyzed at specific locations between adjacent notches and then the ma...

Single crystal specimens of Fe-17 at. % Ga were tested in tension at room temperature. Specimens with a tensile axis orientation of [110] displayed slip lines on the specimen faces corresponding to slip on the {110}with a critical resolved shear stress of 220 MPa. Yielding began at 0.3% elongation and 450 MPa. An ultimate tensile strength of 580 MPa was observed with no fracture occurring throu...

Sun, Jianzhuo. M.S.A.A., Purdue University, May 2014. Biaxial Shear/Tension Failure Criteria of Spectra single fibers. Major Professor: Weinong Chen. An experimental study was conducted to develop the biaxial failure surface criteria of single Spectra 130d and 100d filaments in a torsion-tension environment. The crosssectional profiles of single Spectra fibers were investigated using scanning e...

Poly lactic acid (PLA) is widely used for the manufacture of biodegradable stents (BDSs). It was observed and investigated that tensile loads can significantly affect the degradation rate of PLA in our previous study. Additionally, non-uniform degradation can arise from complicated stress distributions in implanted stents under long-term and pulsatile tensile loading. The objective of this work...

The influence of surface grinding and microstructure on chloride induced stress corrosion cracking (SCC) behavior of 2304 duplex stainless steel has been investigated. Grinding operations were performed both parallel and perpendicular to the rolling direction of the material. SCC tests were conducted in boiling magnesium chloride according to ASTM G36; specimens were exposed both without extern...