Since the world’s energy demands are growing rapidly, there is a constant need for new systems. One of cleanest, most abundant, and renewable natural resources available solar energy; therefore, development surfaces with high absorption radiation increasing. To achieve best efficiency, such coated spectrally selective coatings, which strongly influenced by pigments resin binders. Spectrally pai...

a r t i c l e i n f o Based on previous reports, showing that zirconium alloying to Ti 1 − x Al x N hard coatings can increase their thermal stability, we study in detail the interaction of bias potential and Al content on structure, hardness, thermal stability, and oxidation resistance of arc evaporated Ti 1 − x − y Al x Zr y N hard coatings. For moderate Al-contents, Ti 0.49 Al 0.44 Zr 0.07 N...

Some laser applications produce high power densities that can be dangerous to equipment and operators. We have fabricated thin-film coatings by using molecular electrostatic self-assembly to create a spectrally selective absorbing coating that is able to withstand thermal fluctuations from -20 degrees C to 120 degrees C. We made the thin-film coatings by alternating deposition of an organic dye...

We report on transparent ZnO/Ag/ZnO and ZnO/Ag/ZnO/Ag/ZnO thin-films were deposited on the glass substrate by RF and DC sputtering for ZnO and Ag targets, respectively. The electrical and optical properties of the single and double Low Emissivity coatings were investigated with respect to the deposition time of Ag mid layer. The visible transmittance remains about 65% for single and 45% for...

Die casting process is used since long, but even today problems like erosion, corrosion, soldering and sticking affect die life. These dies undergo thermal cyclic loads from 70 oC to 600 oC during processing. Physical Vapor Deposition (PVD) hard coating can play an important role in such extreme applications. In the present work, we report the use of Chromium based multila...

TiO₂-SiO₂ binary coatings were deposited by a sol-gel dip-coating method using tetrabutyl titanate and tetraethyl orthosilicate as precursors. The structure and chemical composition of the coatings annealed at different temperatures were analyzed by Raman spectroscopy and Fourier Transform Infrared (FTIR) spectroscopy. The refractive indices of the coatings were calculated from the measured tra...

Difunctional boron-containing reactive flame retardant for UV-curable epoxy acrylate oligomer was synthesized from phenyl boronic acid and glycidyl methacrylate. The synthesized reactive diluent was utilized to formulate ultraviolet (UV)-curable wood coatings. The weight fractions of reactive diluent in coatings formulation was varied from 5 to 25 wt % with constant photoinitiator concentration...

The in vitro response in simulated body fluid (SBF) of silicate glass coatings on Ti6A14V was evaluated. Glasses belonging to the SiO2-CaO-MgO-Na2O-K2O-P2O5 system were used to prepare 50-70 m thick coatings on Ti6Al4V, employing a simple enameling technique. Glasses with silica content higher than 55 wt% can be used to prepare coatings that do not crack or delaminate and exhibit good adhesion ...

The mechanical and tribological properties in WC-Co coatings are strongly affected by hardness and elasticity specifications. The results revealed the effect of spraying distance on microhardness and elasticity modulus of coatings. The metallurgical studies have been made on coated samples using optical microscopy, scanning electron microscopy (SEM). Keywords—HVOF, Micro-indentation, Thermal sp...

Abstract Coatings are used in many industrial applications as a protective barrier, improving component properties such friction, wear resistance, and thermal resistivity. When components become worn, any coatings must be thoroughly removed before performing repairs. Laser stripping is relatively new technology developed for the entire coating removal. So far, only laser of has been discussed l...