We demonstrate a novel atomic layer deposition (ALD) process to make high quality nanocrystalline titanium dioxide (TiO2) and zinc oxide (ZnO) with intermediate Al2O3 layers to limit the crystal size. The waveguide losses of TiO2/Al2O3 nanolaminates measured using the prism coupling method for both 633 nm and 1551 nm wavelengths are as low as 0.2 ± 0.1 dB/mm with the smallest crystal size. We a...

agal2o3 nanocomposite were synthesized by solution combustion technique using ammonium carbonate as a new fuel under simultaneous combustion of alumina and silver particles condition. samples prepared with different amount of silver, were characterized by xrd, bet, sem and optical absorption measurements. xrd analysis was used to determine the change in phase and size of the synthesized nanopar...

The purpose of this paper is to study the effects use boron nitride (BN) and other conventional nanoparticles (Al2O3, CuO TiO2) on pressure drop heat transfer in a microchannel. governing equations for forced fluid flow were worked out by using fluent computational dynamics (CFD) code. Computational results collected from CFD code Al2O3 as nano-particle compared with numerical values used liter...

In this study, in situ Al2O3-reinforced Ti3Al composite was fabricated after 8 h of milling and sintering at 850 °C. A mixture TiO2 Al powders were mechanically milled a planetary mill, cold-compacted sintered under protected argon atmosphere. The microstructure microhardness the Al2O3 embedded matrix both room elevated temperature has been reported. obtained results showed that Ti3Al/Al2O3 suc...

We report on a very significant enhancement of the thermal, chemical, and mechanical stability of self-organized TiO2 nanotubes layers, provided by thin Al2O3 coatings of different thicknesses prepared by atomic layer deposition (ALD). TiO2 nanotube layers coated with Al2O3 coatings exhibit significantly improved thermal stability as illustrated by the preservation of the nanotubular structure ...

Conventional supported Pt catalysts have often been prepared by loading Pt onto commercial supports, such as SiO2, TiO2, Al2O3, and carbon. These catalysts usually have simple metal-support (i.e., Pt-SiO2) interfaces. To tune the catalytic performance of supported Pt catalysts, it is desirable to modify the metal-support interfaces by incorporating an oxide additive into the catalyst formula. H...

Efficient conversion of solar energy into useful chemical fuels is a major scientific challenge. Water-splitting dyesensitized photoelectrochemical cells (WS-DSPECs) utilize mesoporous oxide supports sensitized with molecular dyes and catalysts to drive the water-splitting reaction. Despite a growing body of work, the overall efficiencies of WS-DSPECs remain low, in large part because of poor e...

The use of diverse engineered nanomaterials (ENMs) potentially leads to the release of multiple ENMs into the environment. However, previous efforts to understand the behavior and the risks associated with ENMs have focused on only one material at a time. In this study, the chemical interactions between two of the most highly used ENMs, nano-TiO2, and nano-ZnO, were examined in a natural water ...