this work is aimed to evaluate the role of nanoclay in the protective performance of an eco-friendly silane sol-gel layer applied on mild steel substrate in 0.1m sodium chloride solution. at the first step, the effect of ph of the silane solution, consisting of a mixture of γ-glycidoxypropiltrimethoxysilane and methyltriethoxysilane and tetraethoxysilane, on the coating performance was evaluate...

CO2 laser-induced pyrolysis of silane (photothermal aerosol synthesis) was used to produce Si nanoparticles. Particles with an average diameter as small as 5 nm were prepared directly from silane in the gas phase. Etching these particles with mixtures of hydrofluoric acid (HF) and nitric acid (HNO3) is shown to be an effective method to reduce the size of the particles produced by silane pyroly...

This paper describes a novel approach of controlling cell-surface interactions through an electrochemical "switching" of biointerfacial properties of optically transparent microelectrodes. The indium tin oxide (ITO) microelectrodes, fabricated on glass substrates, were modified with poly(ethylene glycol) (PEG) silane to make glass and ITO regions resistant to protein and cell adhesion. Cyclic v...

Background The silicon tetrahydride or silanes is an inorganic colourless gas with spontaneous combustion in air at room temperature [1–3]. Silane or functionalized silanes has widely industrial and medical applications, and works as coupling and impermeabilizing agent. Silane coupling agents have also been applied to bond glass and carbon fibers to polymer matrices, creating a strong adhesion ...

statement of problem: in some clinical situations, repair of composite restorations is treatment of choice. improving the bond strength between one new and old composite usually requires increased surface roughness to promote mechanical interlocking since chemical bonding might not be adequate. similarly, the treatment of a laboratory fabricated resin composite restoration involves the same pro...

Reaction of 4-acyl-oxy-but-1-enyl-silanes with iodosylbenzene in the presence of BF(3) x OEt(2) gave 4-acyloxy-2-oxobutyl-silane and 3-acyloxy-tetrahydrofuran-2-yl-silane via a 1,3-di-oxan-2-yl cation intermediate, which is generated by participation of the acyloxy group during the electrophilic addition of iodine(III) to the substrate.

Objective. To evaluate the effect of five experimental silane monomer primers in vitro on the shear bond strength of a phosphate ester resin-composite cement bonded to silicatized zirconia framework. Methods. A total of 144 planar zirconia (Procera AllZircon) specimens were subjected to tribochemical silica-treatment, randomly divided into 12 sub-groups (n=12), and silanized with 1.0% (v/v) act...

When culturing cells on flexible surfaces, it is important to consider extracellular matrix treatments that will remain on the surface under mechanical strain. Here we investigate differences in laminin deposited on oxidized polydimethylsiloxane (PDMS) with plasma treatment (plasma-only) vs. plasma and aminopropyltrimethoxysilane treatment (silane-linked). We use specular X-ray reflectivity (SX...

This study evaluated the influence of an alternative surface treatment on the microshear bond strength (μsbs) of zirconia-based ceramic. Thirty-five zirconia disks were assigned to five groups according to the following treatments: Control (CO), glass and silane were not applied to the zirconia surface; G1, air blasted with 100μm glass beads + glaze + silane; G2, a gel containing 15% (by weight...

Small-angle and ultrasmall-angle neutron scattering (SANS and USANS) were used to characterize silica nanoparticle dispersion morphologies and the interphase in thermoset dimethacrylate polymer nanocomposites. Silica nanoparticle fillers were silanized with varying mass ratios of 3-methacryloxypropyltrimethoxysilane (MPTMS), a silane that interacts with the matrix through covalent and H-bonding...