Both numerical and experimental studies were conducted to evaluate the performance of an omni-flow wind turbine designed to provide renewable electricity on the top of urban buildings like skyscrapers. The numerical approach was based on Finite Volume Method (FVM) and the turbulence flow was studied with several commonly used Reynoldsaveraged Navier-Stokes turbulence models. The results of the ...

In the background of the offshore wind turbine monitoring applications, we analyzed the characteristics of the offshore wind turbine monitor and gave the architecture of the offshore wind turbine monitor system. We designed the system model of blade wear and vibration in offshore wind turbine, and combined with energy efficient data aggregation algorithm based on the specific application to mon...

A new application of utilizing ultra-wideband (UWB) technology to sense wind turbine blade deflections is introduced in this paper for wind energy cost reduction. The lower UWB band of 3.1-5.3 GHz is applied. On each blade, there will be one UWB blade deflection sensing system, which consists of two UWB antennas at the blade root and one UWB antenna at the blade tip. The detailed topology and c...

Cooling characteristics are given in terms of the variation of average blade temperature at mid-span with cooling-flow rate, Reynolds number, gas/cooling-air absolute temperature ratio, and, for the rotor, gas-stream incidence. Chordwise and spanwise variations of blade temperature are also presented. Measured pressure-drop characteristics indicate that in a gas-turbine engine, with the cooling...

This paper describes the structural design of a tidal turbine composite blade. The structural design is preceded by two steps: hydrodynamic design and determination of extreme loads. The hydrodynamic design provides the blade external shape, i.e. the chord and twist distributions along the blade, which result in optimal performance of the tidal turbine over its lifetime. The extreme loads, i.e....

High-pressure air enters the air-turbine of the dental handpiece and strikes the blades to drive the impeller. The air-turbine has impeller and the air tube is connected to the air-turbine housing. The flowfield of the air-turbine were investigated for the optimum air-turbine design using ANSYS CFX. The objective of the research was to find an optimum design variables for the air-turbine to inc...

1. Abstract Conventional wind turbine blades have been designed using fatigue life predictions based on a fixed wind load distribution that does not fully capture uncertainty of the wind load. This could result in early fatigue failure of blades and eventually increase the maintenance cost of wind turbines. To produce reliable as well as economical wind turbine blades, this paper studies reliab...

in this project creep feed grinding process of gas turbine blade root is investigated with the aim of consistant and controlable production. inthispaper, effectiveness of creep feed grinding process prometers suchas wheel speed, workpiece speed, grind depth and dresser speed are investigated. this investigation include their interaction on thelob of gas torbine blade root, as amajor cause of a ...

This paper presents the theoretical methodology, conceptual demonstration, and validation of a fully automated computer program for the inverse design and optimization of internal convectively cooled three-dimensional axial gas turbine blades. A parametric computer model of the three-dimensional internal cooling network was developed, including the automatic generation of computational grids. A...

Trailing Edge Flaps on wind turbine blades have been studied in order to achieve fatigue load reduction on the turbine components. We show in this paper how Model Predictive Control can be used to do frequency weighted control of the trailing edge flaps in order to reduce fatigue damage on the blade root. The design model is based on a modal model of the blade structure and a steady state aerod...