The melting-induced change in the density of physical network junctions, which are formed by chain entanglements and junctions due to anchoring segments crystals, is studied 1H NMR T2 relaxometry for solution- melt-crystallized ultrahigh-molecular-weight polyethylene (UHMWPE), sc-UH, mc-UH, respectively. results complemented real-time synchrotron wide- small-angle X-ray scattering (WAXS SAXS) a...

A proposed method to obtain the dose for Computed Tomography was evaluated on long a phantom, made of polyethylene. This phantom is 600 mm large. Adopting an empirical characterized function , tendency asymptotical grow by increase scanning length can estimate in infinite single axial rotation x-ray tube. The curve estimated different clinical protocols: tension, pitch, head/body, and center/pe...

Locking mechanisms and metal-liner interface surfaces of six modular acetabular systems were evaluated to determine their effect on micromotion and backside wear of the polyethylene liner. Rotational and axial motion between the metal shell and polyethylene liner was measured in the Duraloc (DePuy, Warsaw, IN), Harris-Galante (Zimmer, Warsaw, IN), Impact (Biomet, Warsaw, IN), Lip Loc (Biomet), ...

Graphene oxide (GO)/ultrahigh-molecular-weight polyethylene (UHMWPE) composites were successfully fabricated through the mechanical ball milling technology and processed according to the hot pressing method. The fractured microstructure features and mechanical properties of the GO/UHMWPE composites were investigated by Scanning electron microscope (SEM) and universal testing machine, respective...

In this study, the reinforcement of ultrahigh-molecular-weight polyethylene (UHMWPE) with biotite was investigated. The biotite filler was mechanically activated with different dry surfactants to improve its compatibility with UHMWPE and decrease agglomeration among biotite particles. Alkyldimethylbenzylammonium chloride (ADBAC) and cetyltrimethylammonium bromide (CTAB) were selected as cationi...

Graphene nanoplatelets (GNPs) are added as reinforcement to ultrahigh molecular weight polyethylene (UHMWPE) with an intended application for orthopedic implants. Electrostatic spraying is established as a potential fabrication method for synthesizing large-scale UHMWPE-GNP composite films. At a low concentration of 0.1 wt % GNP, the composite film shows highest improvement in fracture toughnes...

Ultrahigh molecular weight polyethylene (UHMWPE) has remained the primary polymer used in hip, knee and shoulder replacements for over 50 years. Recent case studies have demonstrated that catastrophic fatigue fracture of the polymer can severely limit device lifetime and are often associated with stress concentration (notches) integrated into the design. This study evaluates the influence of no...

the data on the effect of ethylene concentration on polymerization rate for several modifications of modern highly active titanium–magnesium catalysts ticl4/mgcl2 are presented. these catalysts differ in titanium content and conditions of support preparation, activities, and the shape of kinetic curves. it is found that the observed order of polymerization rate with respect to ethylene in the r...