The fluidization behavior of silica gel was tested in a fluidized bed under different sound pressure levels and sound frequencies. It has been found that the particle mixtures can be fluidized smoothly with sound assistance at low sound frequency owing to the sound energy disrupting large size of agglomerates. The minimum fluidization velocity was found to decrease with increasing sound frequen...

the present work is the successful extension of an improved equation of state (eos) to refrigerant fluids. the objective is the prediction of isothermal and saturated liquid densities of refrigerants. two temperature-independent parameters appearing in the modified eos are closely related to critical point properties of refrigerant fluids. our results showed that, the proposed eos can predict w...

Beamforming is an integral part of most signal processing systems in active or passive sonars. The delays used to generate a beam are functions of the sound velocity, which depends on temperature, salinity, and pressure. There is a loss in array gain if the delays are incorrectly set. This will occur when the sound velocity in the water surrounding the hydrophones is different from the velocity...

We investigate the first sound of a normal dilute and ultracold two-component Fermi gas in a harmonic microtube, i.e. a cylinder with harmonic transverse radial confinement in the length-scale of microns. We show that the velocity of the sound that propagates along the axial direction strongly depends on the dimensionality of the system. In particular, we predict that the first-sound velocity d...

To realize the sound pressure unit directly, the method of sound pressure measurement based on acoustic particle velocity with LDA technique was described. In order to get a simple acoustic field, a travelling wave tube was designed. The sound pressure distribution obtained by microphone along the tube was measured. The result showed the acoustic field inside the tube could be considered as tra...

Abstract The transfer function of a piezoelectric transducer, buffer rod and sample assembly is used to measure the sound velocity of solid materials. From the recorded transfer function, pulse echo patterns at frequencies of the passband of the input signal are reproduced after convoluting with monochromatic RF input signals. The time delay is obtained by performing pulse echo overlap and phas...