Nitriding of p-type Si samples by pulsed DC glow discharge is carried out for different Ar concentrations (30% to 90%) in nitrogen-argon plasma whereas the other parameters like pressure (2 mbar), treatment time (4 hr) and power (175 W) are kept constant. The phase identification, crystal structure, crystallinity, chemical composition, surface morphology and topography of the nitrided layer are...

Ž . Ti,Al NrMo multilayered hard coatings have been designed to fulfil future applications concerning wear-prevention on tool steels. They have been deposited by reactive dc magnetron sputtering on high-speed steel substrates with modulation periods Ž . Ž . between 6.5 and 8 nm. Experimental X-ray diffraction XRD , Rutherford backscattering spectrometry RBS and computational modelling of those ...

Nanocrystalline CdS thin films were grown on glass substrates by a thermal evaporation method in a vacuum of about 2 × 10-5 Torr at substrate temperatures ranging between 25 °C and 250 °C. The physical properties of the layers were analyzed by transmittance spectra, XRD, SEM, and four-point probe measurements, and exhibited strong dependence on substrate temperature. The XRD patterns of the fil...

Samples of CoFe2-xCrxO4 where x varies from 0.0 to 0.5 were prepared by co-precipitation route. These samples were sintered at 750°C for 2 hours. These particles were characterized by X-ray diffraction (XRD) at room temperature. The FCC spinel structure was confirmed by XRD patterns of the samples. The crystallite sizes of these particles were calculated from the most intense peak by Scherrer f...

In this letter, we report on the obtention of hafnium oxide (HfO2) nanostructures by the microwavehydrothermal method. These nanostructures were analyzed by X-ray diffraction (XRD), field-emission gum scanning electron microscopy (FEG-SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDXS), ultraviolet–visible (UV–vis) spectroscopy, and photoluminescence (PL) m...

Zinc selenide (ZnSe) thin films were deposited on to chemically and ultrasonically cleaned glass substrates at different substrate temperatures from room temperature to 200C keeping the thickness fixed at 300 nm by using thermal evaporation method in vacuum. The structural properties of the films were ascertained by X-ray diffraction (XRD) method utilizing a diffractometer. The optical propert...

Strontium ferrite nanoparticles were prepared by a coprecipitation method, and reduced graphene oxide/strontium ferrite/polyaniline (R-GO/SF/PANI) ternary nanocomposites were prepared by in situ polymerization method. The morphology, structure, and magnetic properties of the ternary nanocomposites were investigated by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-I...

Anionic manganese tetrasulfonatophenyl porphyrin (MnTSPP) has been intercalated into the interlamellar space of Mg-Al and Ni-Al layered double hydroxides (LDHs) through the exfoliation/restacking approach by using exfoliated LDH nanosheets and guest molecules as building blocks. The obtained hybrids were characterized by a variety of analytical techniques such as CHN analysis, XRD, FTIR, SEM, H...

Coating growth and mechanical properties of nanolamellar Cr2AlC coatings at various sputtering power were investigated in the present study. Cr2AlC coating was deposited on the IN 718 superalloy and (100) Si wafers by DC magnetron sputtering at different sputtering powers. The structure and properties were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmis...

The grafting reaction between a trifunctional silylating agent and two kinds of 2:1 type layered silicates was studied using FTIR, XRD, TGA, and 29Si CP/MAS NMR. XRD patterns clearly indicate the introduction of 3-aminopropyltriethoxysilane (gamma-APS) into the clay interlayer. In the natural montmorillonite, gamma-APS adopts a parallel-bilayer arrangement, while it adopts a parallel-monolayer ...