The purpose of this study was to compare (a) forces generated during lateral compaction and (b) apical microleakage for nickel-titanium (NiTi) and stainless steel (SS) finger spreaders. Twenty-eight extracted human teeth were instrumented using a standardized rotary instrumentation technique. NiTi and SS #30 spreaders were used to obturate molar roots while the forces generated during obturatio...

The corrosion behavior of high stiffness NiTiCo shape memory alloys was systematically investigated in the present study including straight wires, wire formed stents, and laser cut stents. It was found that the corrosion behavior of NiTiCo alloys is comparable to that of binary NiTi. This is attributed to the small amount of cobalt used in the ternary alloy. Additionally, the corrosion resistan...

Due to a distinct nature of thermomechanical smart materials' reaction to applied loads, a revolutionary approach is needed to measure the hardness and to understand its size effect for pseudoelastic NiTi shape memory alloys (SMAs) during the solid-state phase transition. Spherical hardness is increased with depths during the phase transition in NiTi SMAs. This behaviour is contrary to the decr...

We have investigated the effect of pressure and thermal ageing on transformation behavior of Ni-%45.16Ti shape memory alloy. 70-320 MPa pressure was applied and annealed at 500 o C for 2 hour to see the effect of applied pressure on transformation temperature. It was observed that the starting and final temperature of austenit increased, the martensite start temperature almost remain constant a...

The non-linear nature of the superelastic phase transformation in NiTi means that conventional fatigue life theory is difficult to apply. The volume fraction of martensite/parent phase and its role in the fatigue mechanism is not understood. This paper considers the fatigue life of superelastic NiTi alloys when tested at 2Hz in Ringers solution. In agreement with other researchers [1] [2] it wa...

Since the introduction of engine-driven nickel-titanium (NiTi) instruments, attempts have been made to minimize or eliminate their inherent defects, increase their surface hardness/flexibility and also improve their resistance to cyclic fatigue and cutting efficiency. The various strategies of enhancing instrument surface include ion implantation, thermal nitridation, cryogenic treatment and el...

NiTi foams were created with a structure (32-36% open pores 70-400 microm in size) and mechanical properties (4-25 GPa stiffness, >1000 MPa compressive strength, >42% compressive ductility, and shape-memory strains up to 4%) useful for bone implant applications. A mixture of NiTi and NaCl powders was hot-isostatically pressed at 950 and 1065 degrees C and the NaCl phase was then dissolved in wa...

OBJECTIVE This research aimed to compare, through traction tests, eight types of superelastic and heat-activated NiTi archwires, by six trade companies (GAC, TP, Ormco, Masel, Morelli and Unitek) to those with addition of copper (CuNiTi 27°C and 35°C, Ormco). METHODS The tests were performed in an EMIC mechanical testing machine, model DL10000, capacity of 10 tons, at the Military Institute o...

A switchable dry adhesive based on a nickel-titanium (NiTi) shape-memory alloy with an adhesive silicone rubber surface has been developed. Although several studies investigate micropatterned, bioinspired adhesive surfaces, very few focus on reversible adhesion. The system here is based on the indentation-induced two-way shape-memory effect in NiTi alloys. NiTi is trained by mechanical deformat...

OBJECTIVES The purpose of this study was to investigate the screw-in effect and torque generation depending on the size of glide path during root canal preparation. MATERIALS AND METHODS Forty Endo-Training Blocks (REF A 0177, Dentsply Maillefer) were used. They were divided into 4 groups. For groups 1, 2, 3, and 4, the glide path was established with ISO #13 Path File (Dentsply Maillefer), #...