نتایج جستجو برای: روش incorporation

تعداد نتایج: 428314  

2013
David P. Shelton

and planting of the next crop in that field. Each soil and residue-disturbing operation must be considered when evaluating the amount of residue that will remain for erosion control. (For a more complete listing of implements and residue amounts remaining, as well as more information about the influence of various factors on residue cover, Conclusions Results of this research project indicate t...

Journal: : 2022

کسب‌وکارهای خانوادگی و بین‌المللی­‌شدن آن‌ها توجه روزافزونی را به خود جلب کرده است. در طی سال‌ها پژوهشگران سعی کرده‌اند ویژگی‌های مختلف شرکت‌های که موفقیت بازارهای بین‌المللی کمک می‌کنند، شناسایی کنند. این پژوهش بر خانواده‌گرایی تمرکز شده بررسی می­‌شود چگونه خانواده­‌گرایی فرایند بین‌المللی‌­شدن نقش ایفا می‌کند. خانواده‌­گرایی شایستگی‌ها قابلیت‌هایی اطلاق می‌شود خانوادگی، به­دلیل تعامل بین خانو...

Journal: : 2023

به منظور تولید رادیوایزوتوپ تکنسیم-۹۹ حاصل از واپاشی رادیواکتیو مولیبدن-۹۹ و خالص‌­سازی محصول فرایند انحلال اسیدی هدف مینیاتوری، لازم است آلودگی ید گازی در حد قابل قبولی کاهش یابد. این جاذب‌های جامد استفاده می‌شود. یکی بهترین مورد موردنیت حاوی نقره تشکیل شده است. پژوهش روش سنتز مشخصات جاذب بررسی قرار گرفته برای تهیه بلورهای حفره‌دار با اندازه حدود ۱۰ میکرومتر نسبت آلومینیم سیلیکون برابر 2/5 شد ...

ژورنال: علوم آب و خاک 2012
امیرحسین خوشگفتارمنش, , حمیدرضا عشقی‌زاده, , سید محمدیحیی بیدکی, , محمدعلی حاج عباسی, ,

Waste tire rubbers are considered one of the environment pollutants. Increased production of these pollutants has led to more serious consideration of ways to reduce the harms caused by their accumulation in the environment. Therefore, the effects of incorporation of waste rubber crushed particles in two sizes of 1-2 and 3-5 mm and the amounts of 0, 5, 10 and 20 Mg ha-1 in a calcareous soil (0-...

Journal: :علوم و تکنولوژی پلیمر 0
کریم شلش نژاد سعید منتخبی کلجاهی جواد احسانی زنوز

nanocomposites based on polyamide 6/polypropylene  )pa6/pp 67/33) blend containing 2.5 to 10 phr of nano-caco3  and 5 phr of maleated polypropylene )pp-g-mah) as compatibilizer were prepared by melt compounding followed by injection molding. the mechanical properties, water absorption, as well as shrinkage behavior were characterized and the morphology was studied using scanning electron micros...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید