Transient uptake curves for propane gas in a bed of HZSM-5 using volumetric frequency response setup (batch system) were obtained. Thereby, perturbation, such as change volume, was applied to the solid/gas system, and resulting pressure detected. Two cases mass transfer limitations (bed diffusion control micropore control) compared, it concluded that, presented case, is rate-determining process...

Two series of bimetallic Ni-Co catalysts and corresponding monometallic catalysts with ca. 20 wt% metal loading were evaluated in hydrodeoxygenation (HDO) of phenol as a model compound for bio-oil. The bimetallic catalysts outperformed the corresponding monometallic catalyst in terms of conversion and cyclohexane selectivity. This could be attributed to the formation of Ni-Co alloy, which cause...

The etherification of glycerol with tert-butyl alcohol in the liquid phase, over different sulfonic acid functionalized zeolites, has been studied. The reaction was carried out using microwaves as a way of heating, measured at autogenous pressure and without any solvent. Dealuminated HY and HZSM-5 zeolites by acid treatment were functionalized with two different organosilica precursors: 3-merca...

A series of MCM-41 supported Ni catalysts with high metal dispersion was successfully synthesized by simple co-impregnation using proper ethylene glycol (EG). The acquired Ni-based catalysts performed the outstanding hydrogenolysis activity of guaiacol. The effects of the synthesis parameters including drying temperature, calcination temperature, and metal loading on the physical properties of ...

The kinetics of N2O decomposition to gaseous nitrogen and oxygen over HZSM-5 catalysts with low content of iron (<400 ppm) under transient and steady-state conditions was investigated in the temperature range of 250–380 8C. The catalysts were prepared from the HZSM-5 with Fe in the framework upon steaming at 550 8C followed by thermal activation in He at 1050 8C. The N2O decomposition began at ...

A series of CuO-ZnO-Al2O3 nanoparticles over HZSM-5 were successfully prepared using different methods of batch co-precipitation, semibatch co-precipitation and combined co-precipitation-ultrasound. Nitrates of copper, zinc and aluminum were used as precursors, while Na-ZSM-5 was employed as composite support and sodium carbonate was used as precipitant agent. The effects of preparation methods...