Interdental papillae regeneration remains a challenge in implant dentistry in cases in which papillae are lost following tooth extraction. This report presents an implant case with missing 1st and 2nd premolars and total papillary loss. We performed immediate provisionalization to the first premolar implant with a temporary abutment and crown, whereas the second premolar was submerged. Crown co...

Implant supported dental prostheses are increasingly used in practice. The aim of this narrative review is to present the influence transmucosal surface prosthetic abutment and implant on peri-implant tissue. article describes causes bone loss around implant. Moreover, properties different materials compared discussed. advantages, disadvantages, biomechanical concept implant-abutment connection...

The purpose of this study is to numerically analyze a 3D model an implant under fatigue loads. A bone and V shape were modeled using SolidWorks2008 software. In order obtain exact model, the was assumed as linear orthotropic material. Mechanical loads applied in terms fastening torque abutment mastication force at top crown. tightened into by applying 35 N.cm causing tensile stress within screw...

PURPOSE The aim of this study was to examine the bending moments and fracture patterns of different zirconia abutments with internal implant-abutment connections after static loading and to compare their bending moments to those of internally connected titanium abutments. MATERIALS AND METHODS Three types of customized zirconia abutments (Straumann CARES abutments/Straumann BL implants [T1], ...

PURPOSE To investigate the clinical usefulness, a customized abutment produced with the Pd-Ag-In alloy was compared with a customized abutment produced with the conventional titanium alloy for discoloration and mechanical accuracy. MATERIALS AND METHODS Discoloration and resistance to corrosion of the Pd-Ag-In alloy were evaluated using chemical solutions. Marginal adaptation of internal-type...

The aim of this study was to compare and evaluate strain distribution on dental implant, abutment, screw and crown virtual models in the posterior region. The analysis was performed by means of a 3D virtual model developed by the PRO-ENGINEER System (PRO-ENGINEER, PTC, Needham, MA, USA ) with an external butt joint (3i Implant Innovations, Palm Beach, Florida), square headed Gold Tite abutment ...

The implant-abutment connection of a two-piece dental implant depicts a complex micro-mechanical behavior: a micro-gap is evident at the implant-abutment interface, even in the virgin state. Its width varies when external mechanical load is applied. High resolution synchrotron-based radiography in combination with hard X-ray phase contrast to image this gap and estimate its size is deployed. Th...

This study addresses the design of riprap aprons as a scour countermeasure near abutments under clear-water conditions. It deals with the lateral extent of riprap aprons and the geometry of the scour hole prevailing at the apron edge. The study applies to riprap aprons acting as granular filters. The scour depth appears to be independent for a sufficiently long relative abutment length. Scour h...

Integral Abutment Bridges (IAB) are defined as simple or multiple span bridges in which the bridge deck is cast monolithically with the abutment walls. This kind of bridges are becoming very popular due to different aspects such as good response under seismic loading, low initial costs, elimination of bearings, and less maintenance. However the main issue related to the analysis of this type of...