The inflammatory response adjacent to implants has not been well-investigated and may influence peri-implant tissue levels. The purpose of this study was to assess, histomorphometrically, (1) the timing of abutment connection and (2) the influence of a microgap. Three implant designs were placed in the mandibles of dogs. Two-piece implants were placed at the alveolar crest and abutments connect...

A 3-dimensional finite element analysis was conducted to assess stress distribution in bone, implant, and abutment when gold alloy, porcelain, or resin (acrylic or composite) was used for a 3-unit prosthesis. A unit force was applied axially and then buccolingually to the center of the pontic. For gold and porcelain, similar maximum equivalent stress was found in each part of the models. In alm...

This paper demonstrates the influence of the trailing end of the piston, or inboard, pad on the propensity of a brake to generate audible squeal. The unique technique was employed to measure the dynamic centre of pressure at the pad/disc interface during a normal braking operation. This novel technique uses an embedded pressure sensitive film within the pad. The paper also presents the co-plana...

The long-term success of an implant supported prosthesis depends on many variables. In addition to the osseointegration rules that are commonly acknowledged, a clinician should consider also the biomechanical concepts related to the manufacturing process of a prosthetic structure assembly and their effects on the bone/implant interface. These concepts are particularly important when the anatomi...

OBJECTIVE The aim of this study was to evaluate the influence of removable partial dentures (RPD) on the periodontal health of abutment and non-abutment teeth. MATERIALS AND METHODS A total 107 patients with RPD participated in this study. It was examined 138 RPD, they were 87 with clasp-retained and 51 were RPD with attachments. The following periodontal parameters were evaluated for abutmen...

PURPOSE This study examined the effects of the abutment types and dynamic loading on the stability of implant prostheses with three types of implant abutments prepared using different fabrication methods by measuring removal torque both before and after dynamic loading. MATERIALS AND METHODS Three groups of abutments were produced using different types of fabrication methods; stock abutment, ...

A tapered interference fit provides a mechanically reliable retention mechanism for the implant-abutment interface in a dental implant. Understanding the mechanical properties of the tapered interface with or without a screw at the bottom has been the subject of a considerable amount of studies involving experiments and finite element (FE) analysis. In this paper, approximate closed-form formul...