This research work investigates the efficiency of H3PO4and KOH impregnated jackfruit leaf powder based carbon as adsorbent to remove Ni from wastewater. The removal characteristics of Nickel using both the adsorbents were investigated under various operating variables like contact time, adsorbent dosage, initial metal concentration, solution pH, temperature and stirring speed. The results showe...

Industrial discharges loaded with heavy metals present several problems for aquatic ecosystems and human health. In this context, the study aims to evaluate potential of raw spent coffee grounds remove chromium from an aqueous medium. A structural textural was carried out by FTIR, XRD, TGA analysis. The optimum conditions removal Cr(VI), a solution initial concentration 100 mg/l, were adsorbent...

Calcium alginate beads doped with hydrazine sulphate-treated red mud are investigated as adsorbent for extracting lead ions from water using batch methods of extraction. Different extraction conditions are optimised for maximum lead extraction. Substantial amount of lead is removed, and the adsorption ability is found to be 138.6 mg/g. Surface characterization using FTIR, EDX, and FESEM confirm...

The objective of this research was to seek a cost effective solution to prepare adsorbents for nitrogen oxide from surplus sludge. Leaf litter and powder coal ash were used as cheap and easily available additives. An adsorbent for nitrogen oxide was prepared by pyrolysis of dried sludge mixed with zinc chloride. Under optimum pyrolysis conditions of 375°C for 90 min and a zinc chloride content ...

Batch sorption experiments were carried out using jackfruit seed powder (JSP), for the removal of Methylene Blue (MB) from dyeing synthetic effluent waste water. Effects of process parameters pH, adsorbent mass, adsorbate concentration, contact time and temperature were studied. The adsorption process attains equilibrium within 60 minutes. The amount of MB adsorbed per unit mass of the adsorben...

Abstract This work focuses on investigating the feasibility of using a crosslinked amidoximated copolymeric hydrogel as potential adsorbent to recover uranium and thorium ions from aqueous media. The was synthesized via gamma-irradiation copolymerization characterized through FTIR, TGA, SEM. medium acidity notably affected adsorption capacity both ions. data in line with pseudo-1st-order equati...

Adsorption of Ce(III) from aqueous solution by amino phosphate modified nano TiO2 was investigated. Effects of pH of solution, adsorbent dose, contact time, initial metal concentration and temperature were examined. Experimental data were fitted well by the pseudo second order model. Adsorption was well described by Freundlich isotherm model with a maximum adsorption capacity of 25 mg g-1. Acco...

Total amount of uranium resource in seawater is one thousand times of that in terrestrial ores. A polymeric adsorbent being capable of collecting uranium in seawater was developed in early 1980s, since uranium is inevitable resource to operate atomic power plants. This adsorbent fabric was synthesized by radiation-induced graft polymerization which could impart a desired functional group into f...

The ability of a particular banana fibre in removing reactive dyes from textile wastewater was studied in the present work. Locally available ground seeded banana fibre of ≤ 212 μ was used as adsorbent. Initially the adsorbent was tested on standard Novacron Blue FN-R reactive dye solutions and then it was also applied to raw textile wastewater. The adsorbent was found very effective to remove ...