We present bulk heterojunction organic solar cells fabricated by spray-casting both the PEDOT:PSS hole-transport layer (HTL) and active PBDTTT-EFT:PC71BM layers in air. Devices were fabricated in a (6 x 6) array across a large-area substrate (25 cm) with each pixel having an active area of 6.45mm. We show that the film uniformity and operational homogeneity of the devices are excellent. The cha...

Field tests to estimate spray drift are currently standardized but are very complex, time consuming, expensive and often cannot be compared. Computational fluid dynamics (CFD) is a useful tool to investigate this phenomenon. The airflow generated by the fan of an air-blast sprayer is highly affected by the canopies, which consequently affects the trajectories of spray droplets and has an import...

In recent days, current research is going in alternative fuels due to increase in global warming and pollution in all over the world and also very stringent emission norms. In this way, the study on spray progress plays an important role in improving complete combustion and emission of fuel, because it is directly affects the air-fuel mixture formation. The macroscopic spray characteristics of ...

oxides of nitrogen are the major emission from a diesel engine. it is due to heterogeneous diffusion combustion system with fuel-rich regions, which produce high local temperature around the periphery of the spray where high formation rate of no is promoted. various techniques are therefore employed to reduce the nox emission like egr, scr, etc. in this present work a rotating injector is a tec...

The increased concern about environmental effect of off-target deposits of pesticides use has resulted in the development of numerous spray drift models. Statistical models based on experimental field studies are used to estimate off-target deposits for different sprayers in various environmental conditions. Random-walk and computational fluid dynamics (CFD) models have been used to predict the...

Laser Induced Breakdown Spectroscopy (LIBS) is a laser based spectroscopic technique which has been used widely in various fields, including the determination of the fuel to air ratio (FAR) in combustion. However, the flames examined so far with LIBS were mostly involving gaseous fuels, lean to stoichiometric compositions, and the burners used were of simple geometry. In the present work, LIBS ...

The effects of the bond coat species on the delamination or fracture behavior in thermal barrier coatings (TBCs) was investigated using the yclic thermal fatigue and thermal-shock tests. The interface microstructures of each TBC showed a good condition without cracking or delamination after flame thermal fatigue (FTF) for 1429 cycles. The TBC with the bond coat prepared by the air-plasma spray ...

Coatings prepared from nanosized powders were obtained by spraying ethanol-based colloidal solutions into a plasma plume. The powders investigated included 40 nm γ -Al2O3, 75 nm 8 wt% Y2O3-ZrO2, and 750 nm 25 wt% CeO2-ZrO2. Spray distances from approximately 50 to 63 mm were required to achieve significant coating deposition. As observed in the TEM, the typical lamella morphology of air plasma ...

peri-implantitis is one of the most common reasons for implant failure. decontamination of infected implant surfaces can be achieved effectively by laser irradiation; although the associated thermal rise may cause irreversible bone damage and lead to implant loss. temperature increments of over 10ºc during laser application may suffice for irreversible bone damage.the purpose of this study was ...

The current study focuses on comprehensive fuel spray modeling and its effects on chamber acoustics in combustion dynamics simulations. The fuel spray is modeled using an Eulerian-Lagrangian approach describing the atomizer internal flow, primary atomization, and secondary atomization processes. To anchor the fuel spray model, a series of experiments has been conducted on the fuel atomizer with...