Objectives: This study is undertaken to evaluate the dependence of bond strength of 100% fresh nonprecious alloy and the combination of 50% recast (used) alloy and 50% fresh alloy with three different veneering ceramic material. Materials and methods: To evaluate the shear bond strength between new and recast alloy nonprecious Ni-Cr alloy (System KN®, Adentatec, Germany) was used with three dif...

A new kind of biomedical shape memory TiNiAg alloy with antibacterial function was successfully developed in the present study by the introduction of pure Ag precipitates into the TiNi matrix phase. The microstructure, mechanical property, corrosion resistance, ion release behavior in simulated body fluid, cytotoxicity and antibacterial properties were systematically investigated. The typical m...

Effects of B and Cr additions on magnetostriction and the mechanical properties of polycrystalline Fe83Ga17 alloy were investigated. Small addition of B increased magnetostriction of Fe83Ga17 alloy slightly, and improved the room temperature ductility and tensile strength significantly. The elongation and tensile strength of the (Fe83Ga17)99B1 alloy increased to 3.56% and 548MPa compared with t...

A nearby supernova (SN) explosion in the past can be confirmed by the detection of radioisotopes on Earth that were produced and ejected by the SN. We have now measured a well resolved time profile of the 60Fe concentration in a deep-sea ferromanganese crust and found a highly significant increase 2.8 Myr ago. The amount of 60Fe is compatible with the deposition of ejecta from a SN at a distanc...

Dynamic recrystallization (DRX) is almost universally observed in the microstructure of adiabatic shear bands. It is usually admitted that DRX results from the large temperatures that develop in the band along with very high local strains. This paper reports the observation of dynamically recrystallized nanograins in Ti6Al4V alloy specimens that were impact loaded to only half the failure strai...

Grain boundary segregation provides a method for stabilization of nanocrystalline metals – the selection of an alloying element that will segregate to the boundaries can lower the grain boundary energy, attenuating the driving force for grain growth. The segregation strength, relative to mixing enthalpy, of a binary system determines the propensity for segregation stabilization. This relationsh...

Fatigue resistance of nanocrystalline commercial pure titanium obtained by hydrostatic extrusion was investigated. Coarse grained titanium and Ti6Al4V alloy were used as the reference materials. The fatigue limit and fatigue life examined at constant stress amplitude, were found to increase significantly compared to those of the coarse-grained counterparts. It is suggested that the observed imp...