Nanoporous alumina membranes exhibit high pore densities, well-controlled and uniform pore sizes, as well as straight pores. Owing to these unusual properties, nanoporous alumina membranes are currently being considered for use in implantable sensor membranes and water purification membranes. Atomic layer deposition is a thin-film growth process that may be used to modify the pore size in a nan...

The paper reports a process for synthesis of γ-alumina from kaolin. Kaolin was transformed to meta-kaolin by calcination at 800 ̊C for 2h. γ-alumina powder was synthesized through extracting alumina from metakaolin via H2SO4 and meta-kaolin reactions and consequently precipitation in ethanol, which led to form the aluminum sulfate. The precipitated aluminum sulfate was dried and calcined at 900 ̊...

Many pioneers from around the world followed this initial experience but long-term results and good methodology were lacking. Recently, a number of reports 4-6 have focused attention again on an alumina-on-alumina combination. More than 30 years after its introduction into clinical practice, this article considers the current information on the alumina-on-alumina combination from both experimen...

A new rapid, very simple and one-step sol-gel strategy for the large-scale preparation of highly porous γ-Al₂O₃ is presented. The resulting mesoporous alumina materials feature high surface areas (400 m² g-1), large pore volumes (0.8 mL g-1) and the γ-Al₂O₃ phase is obtained at low temperature (500 °C). The main advantages and drawbacks of different preparations of mesoporous alumina materials ...

Carbon nanotubes (CNTs) were incorporated into alumina/polyethersulfone hollow fibre membranes to enhance the mechanical property and the efficiency of water treatment. Results show that the incorporation of CNTs can greatly limit the formation of large surface pores, decrease the void size in support layers and improve the porosity and pore connectivity of alumina/polyethersulfone membranes. A...

Monolithic ceramics have been fabricated from coated green fibers to create fibrous microstructures. The fibrous monoliths consist of high aspect ratio polycrystalline regions (cells) of a primary phase separated by thin secondphase regions (cell boundaries) designed to improve fracture resistance. The cells are the remnants of the green fiber which consists of ceramic powder and a polymer bind...

Hierarchical micro-/nano-structures made easy. By using extremely rough, chemically etched microstructured aluminium foils, anodization in phosphoric acid under very harsh conditions, e.g., 10 wt% phosphoric acid and room temperature, can be repeatedly accomplished without suffering from breakdown. As a result, an alumina membrane with a three-dimensionally distributed nanopore structure is for...

We have synthesized ordered carbon nanotube (CNT) arrays in porous anodic alumina (PAA) matrix, and have characterized their total optical reflectance and bi-directional reflectance distribution function after each processing step of the microwave plasma chemical vapor deposition process (MPCVD). For a PAA sample without CNT growth, the reflectance shows an oscillating pattern with wavelength t...

Thin alumina films have found applications in electronic circuits and cutting tools and have been recently explored as protective coatings against high temperature oxidation, but these studies have been relatively rare. In this study, amorphous alumina films 3.5 pm thick were produced by reactive sputtering on Co-30Cr-6Al-0.5Y coatings, using a pure aluminum target in Ar + 0 2 atmosphere. Isoth...

The paper reviews progress for a program of research on alumina ceramics processing, with particular reference to diffraction results achieved using tube x-rays, neutrons and synchrotron radiation. Outcomes from three related studies are examined. l Calcination of alumina hydrates to o-alumina via intermediate aluminas, including some new results indicating the co-existence of cubic and tetrago...