A critical issue in the design of the inertial confinement fusion Laboratory Microfusion Facility (LMF) is the vaporization of material from the target chamber walls by the target x-rays. One concern is the high pressures on the unvaporized portion of the wall that occur because of the high instantaneous intensity of the x-rays. These high pressures lead to the launching of shock waves into the...

The study was conducted to develop castor oil – graphite lubricants for cold extrusion of aluminium alloy and to investigate the effect of the developed lubricant on the extrusion pressure of aluminium alloy. Cold extrusion process at a constant extrusion ratio of 1.25:1 was used on 14mm diameter by 30mm long aluminium alloy billets. Experimental results showed that onset pressure ranges from 1...

1. ABSTRACT X-ray diffraction (XRD) measurements have been made to determine residual stresses in embedded Al particles placed between the first and second ply of both unidirectional and fabric graphite/PMR-15 composite specimens. In order to further verify the results obtained, the effect of externally applied four-point bending on the measured strains and stresses in the Al inclusions was inv...

One of the transitions to path intensification production processes is perceptibly low stability details nodes in possession these processes. The stamina small, vindictive, nasampered, rubbing pairs, especially quiet, which works out significant tensions aggressive middles. wear upper balls parts can ruin possession, leads waste energy and material resources. ways solve problem creation functio...

A new amorphous compound with the initial atomic composition Al43Li43Y6Ni8 applied as electrode material for Li-ion batteries is investigated. Unlike other amorphous compounds so-far investigated as anode materials, it already contains Li as a base element in the uncycled state. The amorphous compound powder is prepared by high energy ball milling of a master alloy. It shows a strongly enhanced...

High-frequency pulsed sonic excitation is combined with an infrared camera to image surface and subsurface defects. Irreversible temperature increases on the surface of the object, resulting from localized heating in the vicinity of cracks, disbonds, or delaminations, are imaged as a function of time prior to, during, and following the application of a short pulse of sound. Pulse durations of 5...

This guide sheet outlines a method for the analysis of cubic crystal forms, this being useful to you for interpreting the transmission diffraction pattern produced by scattering electrons off a thin film target of polycrystalline aluminium. The apparatus also contains samples with hexagonal structures. These are pyrolytic graphite targets, and are available both as single crystals and in polycr...

Background: Improvement of the mechanical and tribological properties due to extrusion can be attributed to the improved density and excellent bond strength due to high compressive stress. Methods: To avoid the product defects mathematically contoured cosine profiled die was used for the thermomechanical treatment. Improvement of mechanical characterization like density, hardness, compression t...

The implementation of the achievements in material science both through history as well as today, is directly indicated in the improvement of the efficiency of transport means which then results in the improvement of the technology of traffic and transport. Today’s requirements in the area of engineering materials intended for the construction of transport means impose reduction of mass as one ...

Porosity is a major concern in the production of light metal parts. This work aims to identify some of the mechanisms of microporosity formation during the gravity-poured castings of magnesium alloy AE42. Two graphite plate molds and a ceramic cylindrical mold were selected to produce a wide range of cooling rates. Temperature data during cooling was acquired with type K thermocouples at 60 Hz ...