This report are described the versions and the synthesis results of new designs of electrically small antenna based on ant colony optimization algorithms. To study the parameters of the frame and non-loopback vibrators MMANA package was used. Geometric forms that were obtained might be used as contour lines of printed, slot antenna or as forming surface of the crystal dielectric resonator anten...

Microstrip patch antennas are well known for their advantages in terms of small weight, low profile and ease of manufacture. However, the main limiting factor in implementing these antennas in many applications is their low impedance bandwidth (typically 2-3%). One popularly used technique of enhancing the bandwidth is to use multi-layered microstrip[1,2]. The most widely accepted structure in ...

Several wideband antennas are presented for either wireless application. This paper presents the performance of a simple monopole antenna loaded with an annular dielectric resonator as a wideband transmitting/receiving antenna. By adjusting the length of the monopole and load arm, a 10-dB bandwidth of 94% is achieved while maintaining monopole-like radiation pattern, which covers UWB applicatio...

This paper presents the study on a compact polarization diversity antenna array consisting of two orthogonally placed hybrid dielectric resonator antenna (DRA) elements. A prototype antenna array for IEEE802.11a WLAN application is designed and measured. Over 20 dB isolation and 18% input impedance bandwidth is achieved while symmetrical and unidirectional radiation patterns are maintained over...

A novel multi-band cylindrical dielectric resonator antenna (CDRA) using microwave laminates with permittivity variation in azimuth direction fed by coaxial probe is proposed in this paper. The proposed structures are constructed using different materials having different permittivities in azimuth direction in cylindrical dielectric resonator (DR). In order to determine the performance of vario...

In this paper, we propose a method to use 1-D dielectric slabs, instead of metallic Frequency Selective Surfaces (FSSs), to produce Partially Reflective Surfaces (PRSs) with positive reflection phase gradients. The structure is realized by a single kind of dielectric substrate. It is modeled as cascaded transmission lines and then analyzed by virtue of the Smith Chart from the perspective of im...

Miniature 310μm tall copper-air rectangular coaxial lines (RCL) with the inner conductor supported by periodic dielectric straps are demonstrated in this paper. The measured line loss is about 0.2dB/cm at 26GHz, while the isolation between two parallel lines with a center-to-center separation of 700μm is better than 60dB. Several quasi-planar components are designed and fabricated on the same w...