Effects of copper (Cu) and aluminum (Al) on the adsorption of sulfathiazole (STZ) and tylosin (T) to peat and soil were investigated using a batch equilibration method. Results show that Cu suppressed STZ adsorption onto peat and soil at pH < 5.0 because of the electrostatic competition, while increased STZ adsorption at pH > 5.0 due to the formation of STZ-Cu complexes and/or Cu bridge. In con...

The plant powder of Jaswand (Hibiscus rosa-Sinensis) were activated with sulphuric acid and used as low cost easily available and renewable biological adsorbent for the removal of acid dyes (acid blue, acid red and malachite green) from aqueous solution. Batch experiments were carried out for adsorption kinetics and isotherms. Operating variable studied were pH, temperature, adsorbent dose, ini...

Removal of brilliant red (C. I. Reactive Red 2) from aqueous solutions by adsorption on fish scales of Labeo rohita was investigated. Batch adsorption experiments were carried out under different experimental conditions such as contact time, initial concentration of dye solutions, temperature and pH of the solution. The optimum pH for the adsorption experiment was found to be 7.2. The equilibri...

   Surfaces of synthesis cobalt disulfide has high electron density that could interact with polycyclic aromatic compounds by π-π stacking. Cobalt disulfide was synthesized with the hydrothermal method and characterized by field emission scanning electron microscopy, X-ray diffraction and energy-dispersive X-ray. Using tetracycline as a model analyte, the batch adsorption experiments were c...

Adsorption behavior of unburned carbons from fly ash has been investigated in this study. Batch tests and column test were carried out for several unburned carbon samples from various ash sources and processing schemes. Adsorption isotherms have been obtained from these tests. Results show that the unburned carbons have equal or better adsorption capacity for elemental mercury comparing with so...

Batch experiments were conducted to study the adsorption behaviors of lead ion (Pb2+) onto ferrihydrites prepared using three different procedures which were characterized  by textural analysis (BET). The adsorption removal of Pb2+ by the three ferrihydrites (called FH-1, FH-2 and FH-3, respectively) were compared, and FH-3 shows fast adsorption kinetics as well as hig...

the aim of this study is to investigate the nitrate adsorption on granular ferric hydroxide (gfh). the effect of factors such as initial concentration of nitrate, ph, contact time, and adsorbent mass were determined. the study was done in laboratory–scale in which synthetic nitrate solutions in a batch reactor were placed in contact with the adsorbent to model adsorption kinetics. it was found ...

the present investigation attempted to develop the ceramic adsorbent media in order to remove the mercury from aqueous phase. two ceramics, akadama volcanic ash soil-ceramic (aceramic) and improved magnesium oxide impregnated akadama volcanic ash soil-ceramic (maceramic) were produced from raw akadama volcanic ash soil by heating process to determine the hg(ii) adsorption capacity. adsorption e...

The heavy metals, such as Pb(II) and radioisotope Cr(III), in aqueous solutions are toxic even at trace levels and have caused adverse health impacts on human beings. Hence the removal of these heavy metals from the aqueous environment is of the utmost importance to protect biodiversity, hydrosphere ecosystems, and human beings. In this study, the reduced graphene oxide based inverse spinel nic...

A new and inexpensive lignocellulose/montmorillonite (LNC/MMT) nanocomposite was prepared by a chemical intercalation of LNC into MMT and was subsequently investigated as an adsorbent in batch systems for the adsorption-desorption of Ni(II) ions in an aqueous solution. The optimum conditions for the Ni(II) ion adsorption capacity of the LNC/MMT nanocomposite were studied in detail by varying pa...